The Elastic Modulus of Cold Spray Coatings: Influence of Inter-splat Boundary Cracking

被引:51
|
作者
Sundararajan, G. [1 ]
Chavan, Naveen M. [1 ]
Kumar, S. [1 ]
机构
[1] Int Adv Res Ctr Powder Met & New Mat ARCI, Hyderabad 500005, Andhra Pradesh, India
关键词
cold spray; elastic modulus; inter-splat boundaries; nano indentation; porosity; MICROSTRUCTURAL CHARACTERIZATION; CORROSION BEHAVIOR; PROCESS PARAMETERS; HEAT-TREATMENT; MECHANISM; SUBSTRATE; STIFFNESS;
D O I
10.1007/s11666-013-0034-5
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
It is well established that cold spray coatings exhibit substantially lower elastic modulus as compared to bulk material of the same composition. It has also been observed that the heat treatment of the cold spray coatings results in a significant increase in the elastic modulus of the coating. To check whether the presence of inter-splat cracks is responsible for the above behavior, a wide variety of metallic materials (Cu, Ag, Zn, Nb, Ta, Ti, and 316L stainless steels) in the powder form have been deposited on a mild steel substrate using the cold spray technique. These coatings in both as-coated and heat-treated conditions have been characterized for their porosity, extent of inter-splat boundary cracking, hardness, and elastic modulus. Results indicate that the elastic modulus of the coatings are substantially lower than the bulk value and also that the heat treatment of the coatings consistently increase their elastic modulus values. It has been shown that the reduction in elastic modulus of cold spray coatings can be related to the extent of inter-splat boundary cracking. Further, it has been shown that the standard models relating elastic modulus to the crack density are capable of explaining the observed modulus in the case of cold spray coatings in the as-coated and heat-treated conditions.
引用
收藏
页码:1348 / 1357
页数:10
相关论文
共 50 条
  • [21] Plasma sprayed K 2 Ti 6 O 13 as thermal barrier coatings with high thermal swing for diesel piston enabled by inter-splat bonding and porosity tailoring
    Sun, Yin-Qiu
    Zhu, Yong-Sheng
    Luo, Xiao-Tao
    Yang, Guan-Jun
    Li, Chang-Jiu
    SURFACE & COATINGS TECHNOLOGY, 2024, 483
  • [22] THE INFLUENCE OF HYDROGEN ON THE ELASTIC MODULUS AND ANELASTIC RESPONSE OF COLD WORKED PURE IRON
    Ricker, R. E.
    Pitchure, D. J.
    EFFECTS OF HYDROGEN ON MATERIALS, 2009, : 219 - +
  • [23] ON INFLUENCE OF QUASI-ELASTIC DEFORMATIONS ON MODULUS DEFECT OF COLD WORKED CU
    VANDENBE.A
    DEELEN, WJ
    PHYSICA, 1967, 34 (02): : 251 - &
  • [24] Erratum to: Influence of Plasma Spray Parameters on the Cracking Behavior of Yttria Stabilized Zirconia Coatings
    A. Kucuk
    C. G. Dambra
    C. C. Berndt
    Practical failure analysis, 2001, 1 (3) : 30 - 30
  • [25] Influence of Particle Velocities on Adhesion Strength of Cold Spray Inner Diameter Coatings
    Joachim Meeß
    Manuel Anasenzl
    Ralf Ossenbrink
    Vesselin Michailov
    Journal of Thermal Spray Technology, 2022, 31 : 2025 - 2038
  • [26] Influence of Particle Velocities on Adhesion Strength of Cold Spray Inner Diameter Coatings
    Meess, Joachim
    Anasenzl, Manuel
    Ossenbrink, Ralf
    Michailov, Vesselin
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2022, 31 (07) : 2025 - 2038
  • [27] Variation of Elastic Modulus During Cold Drawing of Seamless Tubes and it's Influence on Springback
    Karanjule, D. B.
    Bhamare, S. S.
    Rao, T. H.
    2016 IEEE INTERNATIONAL CONFERENCE ON INDUSTRIAL ENGINEERING AND ENGINEERING MANAGEMENT (IEEM), 2016, : 1025 - 1029
  • [28] Understanding the cold spray deposition efficiencies of 316L/Fe mixed powders by performing splat tests onto as-polished coatings
    Chu, Xin
    Che, Hanqing
    Phuong Vo
    Chakrabarty, Rohan
    Sun, Binhan
    Song, Jun
    Yue, Stephen
    SURFACE & COATINGS TECHNOLOGY, 2017, 324 : 353 - 360
  • [29] Determination of the elastic modulus and hardness of sol-gel coatings on glass: influence of indenter geometry
    Malzbender, J
    de With, G
    den Toonder, JMJ
    THIN SOLID FILMS, 2000, 372 (1-2) : 134 - 143
  • [30] Effect of arc–current and spray distance on elastic modulus and fracture toughness of plasma-sprayed chromium oxide coatings
    Simanchal Kar
    Partha Pratim Bandyopadhyay
    Soumitra Paul
    Friction, 2018, 6 : 387 - 394