Microstructure and tribological behavior of multilayered CrN coating by arc ion plating

被引：30
|
作者：
Niu, Yunsong [1 ]
Wei, Jie [1 ]
Yu, Zhiming [1 ]
机构：
[1] Chinese Acad Sci, Inst Met Res, Lab Corros & Protect, Shenyang 110016, Peoples R China
来源：
SURFACE & COATINGS TECHNOLOGY | 2015年 / 275卷
关键词：
Tribological behavior; Columnar; Multilayered microstructure; Coefficient of friction; H/E; HIGH-TEMPERATURE OXIDATION; MECHANICAL-PROPERTIES; ABRASION RESISTANCE; RESIDUAL-STRESSES; FILMS; WEAR; TIN; SUBSTRATE; CHROMIUM; NI;
D O I：
10.1016/j.surfcoat.2015.04.045
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Multilayered CrN (M-CrN) coating was successfully prepared by arc ion plating method. The conventional CrN coatings were deposited under Ar + N-2 working pressures of 7.8 x 10(-1) Pa and 1.6 x 10(0) Pa, namely P-CrN and R-CrN respectively, for comparing the tribological behavior. M-CrN coating shows the multilayered microstructure. Transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) measurements evidenced the different stoichiometry between the P-CrN and R-CrN layers. The experimental results show that wear resistance of the M-CrN coatings was much better than that of the conventional CrN coatings. Instead of bulk flake-off behavior, wear mechanism of the M-CrN coating is the micro-area detachment. That is because the multilayered microstructure can inhibit the formation of cracks extended into the substrate, with the high hardness, low coefficient of friction and high H/E value. (C) 2015 Elsevier B.V. All rights reserved.
引用
收藏
页码：332 / 340
页数：9
相关论文
共 50 条
  • [21] Structure, mechanical and tribological properties of CrN thick coatings deposited by circular combined tubular arc ion plating
    Shi, P. Z.
    Wang, J.
    Tian, C. X.
    Li, Z. G.
    Zhang, G. D.
    Fu, D. J.
    Yang, B.
    SURFACE & COATINGS TECHNOLOGY, 2013, 228 : S534 - S537
  • [22] Thick CrN/TiN multilayers deposited by arc ion plating
    Huang, M. D.
    Liu, Y.
    Meng, F. Y.
    Tong, L. N.
    Li, P.
    VACUUM, 2013, 89 : 101 - 104
  • [23] Effect of Axial Magnetic Field on the Microstructure and Mechanical Properties of CrN Films Deposited by Arc Ion Plating
    Yan-Hui Zhao
    Li Xu
    Chao-Qian Guo
    Wen-Jin Yang
    Guo-Qiang Lin
    Bao-Hai Yu
    ActaMetallurgicaSinica(EnglishLetters), 2016, 29 (06) : 546 - 553
  • [24] Microstructure and Mechanical Properties of Thick Cr/CrN Multilayer Coatings by Multi-arc Ion Plating
    Lu Bingying
    Ma Fei
    Ma Dayan
    RARE METAL MATERIALS AND ENGINEERING, 2022, 51 (05) : 1558 - 1564
  • [25] Effect of Axial Magnetic Field on the Microstructure and Mechanical Properties of CrN Films Deposited by Arc Ion Plating
    Zhao, Yan-Hui
    Xu, Li
    Guo, Chao-Qian
    Yang, Wen-Jin
    Lin, Guo-Qiang
    Yu, Bao-Hai
    ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2016, 29 (06) : 546 - 553
  • [26] Effect of Axial Magnetic Field on the Microstructure and Mechanical Properties of CrN Films Deposited by Arc Ion Plating
    Yan-Hui Zhao
    Li Xu
    Chao-Qian Guo
    Wen-Jin Yang
    Guo-Qiang Lin
    Bao-Hai Yu
    Acta Metallurgica Sinica (English Letters), 2016, 29 : 546 - 553
  • [27] Microstructure and Mechanical Properties of Thick Cr/CrN Multilayer Coatings by Multi-arc Ion Plating
    Lu, Bingying
    Ma, Fei
    Ma, Dayan
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2022, 51 (05): : 1558 - 1564
  • [28] Tribological behavior of Ti-Si-N coating layers prepared by a hybrid system of arc ion plating and sputtering techniques
    Park, ON
    Park, JH
    Yoon, SY
    Lee, MH
    Kim, KH
    SURFACE & COATINGS TECHNOLOGY, 2004, 179 (01): : 83 - 88
  • [29] Microstructure, Mechanical and Tribological Properties of Arc Ion Plating NbN-Based Nanocomposite Films
    Fu, Yingying
    Li, Hongxuan
    Chen, Jianmin
    Guo, Hongjian
    Wang, Xiang
    NANOMATERIALS, 2022, 12 (21)
  • [30] Microstructure and thermal conductivity of AlN coating on Cu substrate deposited by arc ion plating
    Zhang, Yongjian
    Dai, Jingjie
    Bai, Guangzhu
    Zhang, Hailong
    MATERIALS CHEMISTRY AND PHYSICS, 2020, 241
12345