Compressive properties and deformation behaviors of sintered W-m-ZrO2 alloy under different temperature

被引：17

作者：

Zhao, Yunchao ^{[1
]}

Xu, Liujie ^{[1
,2
]}

Guo, Mingyi ^{[1
]}

Li, Zhou ^{[1
]}

Li, Xiuqing ^{[2
]}

Wei, Shizhong ^{[2
]}

机构：

[1] Henan Univ Sci & Technol, Sch Mat Sci & Engn, Luoyang 471023, Henan, Peoples R China

[2] Henan Univ Sci & Technol, Natl Joint Engn Res Ctr Abras Control & Molding Me, Luoyang 471003, Peoples R China

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2022年 / 859卷

基金：

中国国家自然科学基金;

关键词：

Tungsten alloy; Secondary -phase strengthening; Compressive properties; Deformation behaviors; STRENGTHENING MECHANISMS; HOT DEFORMATION; TUNGSTEN;

D O I：

10.1016/j.msea.2022.144238

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The compressive properties of sintered tungsten alloys with different m-ZrO2 weight percentage (0, 0.5, 1.0%) were tested at room temperature and high temperature, and the hot deformation behaviors of the three metals were investigated under different temperature (1300-1600 degrees C) and strain rate (0.005-1 s-1). The room tem-perature strengthening model of zirconia particle reinforced tungsten alloy was established, and the hot defor-mation activation energy and constitutive equation of the three metals were calculated. Characterized by field emission scanning electron microscopy (FE-SEM) and the electron back scattering diffraction (EBSD) technique, the results show that zirconia doping can significantly refine the tungsten grain size, improve sintering densities, and uniformly disperse in the boundaries and inside of tungsten grain. The room temperature compression re-sults show that the ultimate compressive strength and strain-to-failure of W-1.0 m-ZrO2 increase by 51.94% and 96.69%, respectively compared with pure tungsten. The main contribution to the room temperature strength of tungsten alloys is the fine grain strengthening caused by zirconia doping, about 60% for W-1.0 m-ZrO2,while the strengthening of the secondary phase particles accounts only for about 5%. High-temperature compression results show that zirconia doping increases the dislocation density of the alloy and significantly improve the ultimate compressive strength under high-temperature compression, but the influence of zirconia content on the strength will be weakened at high temperature. The doping of zirconia reduces the hot deformation activation of tungsten alloys and improves the hot processing behavior of tungsten alloy.

引用

页数：10

共 30 条

[11]

Pang H., 2022, J ALLOY COMPD, V920, DOI [10.1016/j.jallcom.2022.165937, DOI 10.1016/J.JALLCOM.2022.165937]

[12] Phase evolution of hydrothermal synthesis oxide-doped molybdenum powders [J].

Sun, Tielong ;

Xu, Liujie ;

Wei, Shizhong ;

Xiao, Fangnao ;

Li, Zhou ;

Fan, Xiaoman ;

Zhou, Yucheng .

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2020, 86

[13] Dynamic recrystallization mechanism and improved mechanical properties of a near α high temperature titanium alloy processed by severe plastic deformation [J].

Sun, Yonggang ;

Zhang, Changjiang ;

Feng, Hong ;

Zhang, Shuzhi ;

Han, Jianchao ;

Zhang, Wanggang ;

Zhao, Ertuan ;

Wang, Hongwei .

MATERIALS CHARACTERIZATION, 2020, 163

[14] Strengthening mechanism and effect of Al2O3 particle on high-temperature tensile properties and microstructure evolution of W-Al2O3 alloys [J].

Wang, Changji ;

Huang, He ;

Wei, Shizhong ;

Zhang, Laiqi ;

Pan, Kunming ;

Dong, Xiaonan ;

Xu, Liujie ;

Chen, Chong ;

Mao, Feng ;

Zhang, Cheng ;

Dong, Zhili .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 835

[15] Structure evolution of Y2O3 and consequent effects on mechanical properties of W-Y2O3 alloy prepared by ball milling and SPS [J].

Wang, Man ;

Sun, Honghong ;

Pang, Baolin ;

Xi, Xiaoli ;

Nie, Zuoren .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 832

[16] Two optimized post-heat treatments to achieve high-performance 90W-7Ni-3Fe alloys fabricated by laser-directed energy deposition [J].

Wei, Chao ;

Zhao, Zhuang ;

Ye, Han ;

Yang, Yang ;

Tang, Jingang ;

Shen, Xianfeng ;

Le, Guomin .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 833

[17] Strengthening mechanisms in a high-strength bulk nanostructured Cu-Zn-Al alloy processed via cryomilling and spark plasma sintering [J].

Wen, Haiming ;

Topping, Troy D. ;

Isheim, Dieter ;

Seidman, David N. ;

Lavernia, Enrique J. .

ACTA MATERIALIA, 2013, 61 (08) :2769-2782

[18] Solute atom mediated Hall-Petch relations for magnesium binary alloys [J].

Wen, Yu ;

Guan, Bo ;

Xin, Yunchang ;

Liu, Chenglu ;

Wu, Peidong ;

Huang, Guangjie ;

Liu, Qing .

SCRIPTA MATERIALIA, 2022, 210

[19] Preparation of ultrafine-grained/nanostructured tungsten materials: An overview [J].

Wu, Yu-Cheng ;

Hou, Qing-Qing ;

Luo, Lai-Ma ;

Zan, Xiang ;

Zhu, Xiao-Yong ;

Li, Ping ;

Xu, Qiu ;

Cheng, Ji-Gui ;

Luo, Guang-Nan ;

Chen, Jun-Ling .

JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 779 :926-941

[20] Extremely uniform nanosized oxide particles dispersion strengthened tungsten alloy with high tensile and compressive strengths fabricated involving liquid-liquid method [J].

Xiao, Fangnao ;

Barriere, Thierry ;

Cheng, Gang ;

Miao, Qiang ;

Zuo, Shiwei ;

Wei, Shizhong ;

Xu, Liujie .

JOURNAL OF ALLOYS AND COMPOUNDS, 2021, 878

← 1 2 3 →