NUMERICAL ANALYSIS OF COMPOSITE FOULING IN CORRUGATED PLATE HEAT EXCHANGER

被引：0

作者：

Li, Wei ^{[1
]}

Li, Hongxia ^{[1
]}

机构：

[1] Zhejiang Univ, Dept Energy Engn, Hangzhou 310027, Zhejiang, Peoples R China

来源：

PROCEEDINGS OF THE ASME SUMMER HEAT TRANSFER CONFERENCE - 2013, VOL 4 | 2014年

关键词：

fouling; numerical simulation; Von-Karman analogy; PHE; FLUID-FLOW; PERFORMANCE; SIMULATION;

D O I：

暂无

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

This paper provides a numerical analysis on precipitation and particulate fouling in a corrugated plate heat exchanger. This analysis started from the mass balance fouling model, and Realizable kappa-epsilon model with non-equilibrium wall functions is used in the 3D numerical simulation considering the realistic geometries of the flow channel to obtained Nusselt number and wall shear stress, while Von-Karman analogy is used to obtain mass transfer coefficient. The numerical analysis is verified by experimental study. The predicted influence of fluid velocity in fouling resistance is compatible with experimental data that it can help to optimize the design of plate heat exchangers. The investigation significantly simplifies the fouling analysis of complex flow fields and can be used to assess the fouling potential of corrugated plate heat exchangers.

引用

页数：8

共 31 条

[1] Thermal energy savings in pilot-scale plate heat exchanger system during product processing using modified surfaces [J].

Balasubramanian, S. ;

Puri, V. M. .

JOURNAL OF FOOD ENGINEERING, 2009, 91 (04) :608-611

[2]

Cooper A., 1983, HEAT EXCHANGER DESIG

[3]

Cotta RM, 2006, Handbook of numerical heat transfer, V2nd

[4] Conjugate fluid flow and kinetics modeling for heat exchanger fouling simulation [J].

De Bonis, Maria Valeria ;

Ruocco, Gianpaolo .

INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2009, 48 (10) :2006-2012

[5] THE EFFECT OF THE CORRUGATION INCLINATION ANGLE ON THE THERMOHYDRAULIC PERFORMANCE OF PLATE HEAT-EXCHANGERS [J].

FOCKE, WW ;

ZACHARIADES, J ;

OLIVIER, I .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 1985, 28 (08) :1469-1479

[6] Experimental and numerical heat transfer in a plate heat exchanger [J].

Galeazzo, Flavio C. C. ;

Miura, Raquel Y. ;

Gut, Jorge A. W. ;

Tadini, Carmen C. .

CHEMICAL ENGINEERING SCIENCE, 2006, 61 (21) :7133-7138

[7] Dynamic modelling and simulation of plate heat exchangers under milk fouling [J].

Georgiadis, MC ;

Macchietto, S .

CHEMICAL ENGINEERING SCIENCE, 2000, 55 (09) :1605-1619

[8] Heat transfer and fluid flow in a plate heat exchanger. Part II: Assessment of laminar and two-equation turbulent models [J].

Gherasim, Iulian ;

Galanis, Nicolas ;

Cong Tam Nguyen .

INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2011, 50 (08) :1499-1511

[9] Integrated experimental investigation of seawater composite fouling effect on the 90/10 Cu/Ni tube [J].

Izadi, M. ;

Aidun, D. K. ;

Marzocca, P. ;

Lee, H. .

APPLIED THERMAL ENGINEERING, 2011, 31 (14-15) :2464-2473

[10] A new approach to numerical simulation of small sized plate heat exchangers with chevron plates [J].

Jain, Sanjeev ;

Joshi, Aniruddha ;

Bansal, P. K. .

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2007, 129 (03) :291-297

← 1 2 3 4 →