Precision tool setting for fabrication of a microstructure array

被引：49

作者：

Gao, Wei ^{[1
]}

Chen, Yuan-Liu ^{[1
,2
]}

Lee, Kang-Won ^{[1
]}

Noh, Young-Jin ^{[1
]}

Shimizu, Yuki ^{[1
]}

Ito, So ^{[1
]}

机构：

[1] Tohoku Univ, Dept Nanomech, Sendai, Miyagi 980, Japan

[2] Zhejiang Univ, State Key Lab Fluid Power Transmiss & Control, Hangzhou 310003, Zhejiang, Peoples R China

来源：

CIRP ANNALS-MANUFACTURING TECHNOLOGY | 2013年 / 62卷 / 01期

关键词：

Measurement; Cutting tool; Positioning; SURFACES;

D O I：

10.1016/j.cirp.2013.03.013

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A method is proposed for setting a new diamond cutting tool when tool replacement is required during the fabrication of a microstructure array on the outer surface of a roll by a fast tool servo with a force sensor. The sectional profiles of a small reference area in the fabricated part by the replaced old tool are detected through scanning the tip of the new tool with a constant contact force controlled by the fast tool servo. The new tool can be set accurately based on the identified position of the tool tip with respect to the reference area. (c) 2013 CIRP.

引用

页码：523 / 526

页数：4

共 9 条

[1] Tool setting on a B-axis rotary table of a precision lathe
Bono, Matthew J.
Kroll, Jeremy J.
[J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2008, 48 (11) : 1261 - 1267
[2] Advances in engineered surfaces for functional performance
Bruzzone, A. A. G.
Costa, H. L.
Lonardo, P. M.
Lucca, D. A.
[J]. CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2008, 57 (02) : 750 - 769
[3] Surfaces in precision engineering, microengineering and nanotechnology
De Chiffre, L
Kunzmann, H
Peggs, GN
Lucca, DA
[J]. CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2003, 52 (02) : 561 - 577
[4] Recent advances in mechanical micromachining
Dornfeld, D.
Min, S.
Takeuchi, Y.
[J]. CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2006, 55 (02) : 745 - 768
[5] Evans CJ, 1999, CIRP ANNALS 1999: MANUFACTURING TECHNOLOGY, VOL 48 NO 2 1999, P541
[6] Precision nano-fabrication and evaluation of a large area sinusoidal grid surface for a surface encoder
Gao, W
Araki, T
Kiyono, S
Okazaki, Y
Yamanaka, M
[J]. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2003, 27 (03): : 289 - 298
[7] Lee K. W., 2011, International Journal of Precision Technology, V2, P211, DOI 10.1504/IJPTECH.2011.039460
[8] Sawa M, 1993, CIRP ANN-MANUF TECHN, V42, P87
[9] Precision engineering for astronomy and gravity science
Shore, P.
Cunningham, C.
DeBra, D.
Evans, C.
Hough, J.
Gilmozzi, R.
Kunzmann, H.
Morantz, P.
Tonnellier, X.
[J]. CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2010, 59 (02) : 694 - 716

← 1 →