Combining phosphonic acid-functionalized anchoring ligands with asymmetric ancillary ligands in bis(diimine) copper(I) dyes for dyesensitized solar cells

A 'surfaces-as-ligands' strategy is used to assemble heteroleptic copper(I) dyes [Cu(L-anchor)(L-ancillary)](+) on FTO/TiO2 electrodes for dye-sensitized solar cells (DSCs). The anchoring domain, Lanchor, is either ((6,6'-diphenyl-[2,2'-bipyridine]-4,4'-diyl)bis(4,1-phenylene))bis(phosphonic acid) (1) or ((6,6'-dimethyl-[2,2'-bipyridine]-4,4'-diyl)bis(4,1-phenylene)) bis(phosphonic acid) (2). Asymmetric ancillary ligands with a 2,2'-bipyridine metal-binding domain are used to counter the sterically-demanding 6,6'-diphenyl-substitution pattern in anchor 1; L-ancillary = 6-methyl-4-phenyl-2,2'-ipyridine (3), 6-methyl-4-(4-bromophenyl)-2,2'-bipyridine (4), 6-methyl-4-(4-methoxyphenyl)-2,2'-bipyridine (5) or 6-methyl-4-(3,4,5-trimethoxyphenyl)-2,2'-bipyridine (6). Solid-state absorption spectra of adsorbed [Cu(1)(L-ancillary)](+) and [Cu(2)(L-ancillary)](+), and external quantum efficiency (EQE) spectra of DSCs containing these dyes confirm that incorporation of 6,6'-diphenyl-substituted 1 leads to a broadened spectral response at lower energies compared to dyes with anchor 2; dye-loading is higher for [Cu(2)(L-ancillary)](+) than for [Cu(1)(L-ancillary)](+), and EQEmax is >41% for [Cu(2)(L-ancillary)](+) compared to < 12% for [Cu(1)(L-ancillary)](+). Enhanced values of the short-circuit current density (JSC) are observed on going from anchor 1 to 2, independent of Lancillary. For the series of [Cu(2)(L-ancillary)](+) dyes, photoconversion efficiencies (confirmed using four DSCs per dye) vary with Lancillary in the order 3 similar to 5 > 6 > 4 on the day of DSC assembly, and 5 > 3 similar to 6 > 4 after a week. The best performing DSCs achieve efficiencies of similar to 37% relative to N719 set at 100%.