Study of Measurement Condition Optimization in Critical Dimension-Scanning Electron Microscope

The critical-dimension scanning electron microscope (CD-SEM) is an essential tool for semiconductor fabrication process control because of its high resolution and high precision. However, in ArF lithography, the CD of resist changes during CD-SEM measurement due to shrinkage caused by the electron beam irradiation. This shrinkage can be reduced by measurement parameters; however, there is a trade-off relationship between shrinkage and precision. Thus, measuring the CD of an ArF resist pattern precisely with small shrinkage is difficult. The authors propose an optimization method using, the Taguchi method. Four measurement parameters were chosen as control factors for an L18 orthogonal array: probe current, acceleration voltage, horizontal length of field-of-view, and number of image acquisitions. As a result, high prediction accuracy was obtained that is smaller than 0.2 nm for shrinkage and 0.1 nm for precision. Moreover, an optimum measurement condition that achieves 0.28 nm shrinkage and 0.37 nm precision was also obtained. Thus, the proposed method was demonstrated as a promising method to optimize CD measurement parameters.