Low tempderature synthesis of LiNi0.5Mn1.5O4 spinel

被引：22

作者：

Fang, HS ^{[1
]}

Wang, ZX ^{[1
]}

Li, XH ^{[1
]}

Guo, HJ ^{[1
]}

Peng, WJ ^{[1
]}

机构：

[1] Cent S Univ, Sch Met Sci & Engn, Changsha 410083, Peoples R China

来源：

MATERIALS LETTERS | 2006年 / 60卷 / 9-10期

关键词：

lithium ion batteries; cathode material; LiNi0.5Mn1.5O4; solid-state reaction;

D O I：

10.1016/j.matlet.2005.11.013

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Pure LiNi0.5Mn1.5O4 phase was prepared by one-step solid-state reaction at 600 degrees C in air. TG measurement revealed that the oxygen loss occurred when the mixed precursors were heated above 700 degrees C. X-ray diffraction (XRD) pattern and scanning electron microscopic (SEM) image indicated that LiNi0.5Mn1.5O4 has cubic spinel structure with small and homogeneous particles. Electrochemical test showed that the prepared LiNi0.5Mn1.5O4 delivered up to 138 mA h g(-1), and the capacity retained 128 mA h g(-1) after 30 cycles. (c) 2005 Elsevier B.V. All rights reserved.

引用

页码：1273 / 1275

页数：3

共 14 条

[1] Optimizing preparation conditions for 5 V electrode performance, and structural changes in Li1-xNi0.5Mn1.5O4 spinel
Alcántara, R
Jaraba, M
Lavela, P
Tirado, JL
[J]. ELECTROCHIMICA ACTA, 2002, 47 (11) : 1829 - 1835
[2] LiCuxIICuyIIIMn[2-(x+y])III,IVO4: 5V cathode materials
EinEli, Y
Howard, WF
[J]. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1997, 144 (08) : L205 - L207
[3] Crystal structure and cathode performance dependence on oxygen content of LiMn1.5Ni0.5O4 as a cathode material for secondary lithium batteries
Idemoto, Y
Narai, H
Koura, N
[J]. JOURNAL OF POWER SOURCES, 2003, 119 : 125 - 129
[4] A novel cathode Li2CoMn3O8 for lithium ion batteries operating over 5 volts
Kawai, H
Nagata, M
Tukamoto, H
West, AR
[J]. JOURNAL OF MATERIALS CHEMISTRY, 1998, 8 (04) : 837 - 839
[5] Molten salt synthesis of LiNi0.5Mn1.5O4 spinel for 5 V class cathode material of Li-ion secondary battery
Kim, JH
Myung, ST
Sun, YK
[J]. ELECTROCHIMICA ACTA, 2004, 49 (02) : 219 - 227
[6] Nanosize LiNiyMn2-yO4 (0, y ≤ 0.5) spinels synthesized by a sucrose-aided combustion method.: Characterization and electrochemical performance
Lazarraga, MG
Pascual, L
Gadjov, H
Kovacheva, D
Petrov, K
Amarilla, JM
Rojas, RM
Martin-Luengo, MA
Rojo, JM
[J]. JOURNAL OF MATERIALS CHEMISTRY, 2004, 14 (10) : 1640 - 1647
[7] Preparation and characterization of nano-crystalline LiNi0.5Mn1.5O4 for 5 V cathode material by composite carbonate process
Lee, YS
Sun, YK
Ota, S
Miyashita, T
Yoshi, M
[J]. ELECTROCHEMISTRY COMMUNICATIONS, 2002, 4 (12) : 989 - 994
[8] Nano-crystalline LiNi0.5Mn1.5O4 synthesized by emulsion drying method
Myung, ST
Komaba, S
Kumagai, N
Yashiro, H
Chung, HT
Cho, TH
[J]. ELECTROCHIMICA ACTA, 2002, 47 (15) : 2543 - 2549
[9] Synthesis and characterization of Li[Ni1/2Mn3/2]O4 by two-step solid state reaction
Ohzuku, T
Ariyoshi, K
Yamamoto, S
[J]. JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2002, 110 (05) : 501 - 505
[10] Solid-state redox potentials for Li[Me1/2Mn3/2]O4 (Me: 3d-transition metal) having spinel-framework structures:: a series of 5 volt materials for advanced lithium-ion batteries
Ohzuku, T
Takeda, S
Iwanaga, M
[J]. JOURNAL OF POWER SOURCES, 1999, 81 : 90 - 94

← 1 2 →