Use of reservoir simulation for optimizing recovery performance

A three-dimensional finite-difference reservoir simulator, integrated in an EOR expert system, has been used to determine the reservoir management and production strategies to optimize the oil recovery from a carbonate reservoir. The reservoir is a candidate for an EOR process or otherwise subject to abandonment. After screening the reservoir for an appropriate EOR process on the basis of its properties, it was determined that miscible carbon-dioxide injection is the most suitable process. The management strategies involved studying different design parameters to maximize the project profitability. The injection techniques that were tested in this study include: (1) water-altemating-gas (WAG), (2) simultaneous water-altemating-gas (SWAG) injection, and (3) gas injection in the bottom of the reservoir with water injection in the reservoir top. All simulation runs were conducted using permeability fields that have been conditioned with core data taken from wells in the field. Specific strategy that was used includes the use of horizontal injectors in conjunction with vertical producers. This well configuration has been shown to yield the best oil recovery compared to other well configurations. Simulation results show that the most economical method to produce this reservoir was to simultaneously inject water at the reservoir top and gas at the reservoir bottom. This production strategy has resulted in better sweep efficiency and therefore high oil recovery and good economics. (C) 2003 Elsevier B.V. All rights reserved.