Ultrasonic Heating of Poly(ethylene terephthalate), Polypropylene, High-Density Polyethylene, and Low-Density Polyethylene Films

被引：2
|
作者：
Murao, Satoshi [1 ]
Hosokawa, Takehiro [1 ]
Kajitani, Tsuyoshi [2 ]
机构：
[1] AutoNetworks Technol Ltd, Elect Wire & Mat R&D Div, Suzuka, Mie 5138631, Japan
[2] Tohoku Univ, Grad Sch Engn, Dept Appl Phys, Sendai, Miyagi 9808579, Japan
来源：
APPLIED PHYSICS EXPRESS | 2012年 / 5卷 / 09期
关键词：
PLASTIC WELDING SYSTEMS;
D O I：
10.1143/APEX.5.096601
中图分类号：
O59 [应用物理学];
学科分类号：
摘要：
The ultrasonic heating rates of poly(ethylene terephthalate) (PET), polypropylene (PP), high-density polyethylene (HDPE), and low-density polyethylene (LDPE) films are reported. For this measurement, we used an experimental set-up consisting of an ultrasonic vibrator, a horn, and a radiation thermometer. Because the horn did not touch the film surfaces, the temperature increase was only by the ultrasonic vibration transmitted from the horn. The highest and lowest temperature increase were recorded for the PET and LDPE films, respectively. The temperature increase was related with the viscosity of the polymer films. (C) 2012 The Japan Society of Applied Physics
引用
收藏
页数：3
相关论文
共 50 条
  • [31] Processing of high density polyethylene and poly(ethylene terephthalate) blends
    Basu, S
    Kale, DD
    MACROMOLECULAR SYMPOSIA, 1997, 118 : 329 - 334
  • [32] Linear low-density polyethylene/high-density polyethylene blends: Effect of high-density polyethylene content on die swell and flow instability
    Freitas, Daniel M. G.
    Oliveira, Akidauana D. B.
    Alves, Amanda M.
    Cavalcanti, Shirley N.
    Agrawal, Pankaj
    Melo, Tomas J. A.
    JOURNAL OF APPLIED POLYMER SCIENCE, 2021, 138 (09)
  • [33] Linear low-density polyethylene/high-density polyethylene blends: Effect of high-density polyethylene content on die swell and flow instability
    Departamento de Engenharia de Materiais, Universidade Federal de Campina Grande, Campina Grande
    Paraiba, Brazil
    J. Appl. Polym. Sci., 2021, 9
  • [34] Properties of poly(trimethylene terephthalate)/low-density polyethylene blends
    Janik, Jolanta
    Pilawka, Ryszard
    Goracy, Krzysztof
    Wilpiszewska, Katarzyna
    Schmidt, Beata
    PRZEMYSL CHEMICZNY, 2013, 92 (11): : 1984 - 1986
  • [35] CRYSTALLIZATION OF POLY(PHENYLENE SULFIDE) IN BLENDS WITH HIGH-DENSITY POLYETHYLENE AND POLY(ETHYLENE-TEREPHTHALATE)
    JOG, JP
    SHINGANKULI, VL
    NADKARNI, VM
    POLYMER, 1993, 34 (09) : 1966 - 1969
  • [36] Improving poly(ethylene terephthalate) high-density polyethylene blends by using graft copolymers
    Boutevin, B
    Lusinchi, JM
    Pietrasanta, Y
    Robin, JJ
    POLYMER ENGINEERING AND SCIENCE, 1996, 36 (06): : 879 - 884
  • [37] Improving poly(ethylene terephthalate)/high-density polyethylene blends by using graft copolymers
    Ecole Nationale Superieure de Chimie, de Montpellier, Montpellier, France
    Polym Eng Sci, 6 (879-884):
  • [38] Analysis of Triboelectrostatic Separation Process of Mixed Poly(ethylene terephthalate) and High-Density Polyethylene
    Lyskawinski, Wieslaw
    Baranski, Mariusz
    Jedryczka, Cezary
    Mikolajewicz, Jacek
    Regulski, Roman
    Rybarczyk, Dominik
    Sedziak, Dariusz
    ENERGIES, 2022, 15 (01)
  • [39] Extrusion blow molding of high-density polyethylene-poly(ethylene terephthalate) blends
    Kumaravel, G
    Jabarin, SA
    ADVANCES IN POLYMER TECHNOLOGY, 1996, 15 (03) : 191 - 204
  • [40] MELT COMPATIBILITY OF METALLOCENE LINEAR LOW-DENSITY POLYETHYLENE AND HIGH-DENSITY POLYETHYLENE BLENDS
    Wang Rui
    Yang Qi
    Huang Yajiang
    Li Guangxian
    Wang Jinghui
    Lai Renwu
    ACTA POLYMERICA SINICA, 2010, (09) : 1108 - 1115
12345