Influence of geometric imperfections and lamination defects on the buckling behaviour of composite cylinders

被引：0
|
作者：
Panzeri, N [1 ]
Poggi, C [1 ]
机构：
[1] Politecn Milan, Dept Struct Engn, I-20133 Milan, Italy
来源：
THIN-WALLED STRUCTURES: RESEARCH AND DEVELOPMENT | 1998年
关键词：
composite cylinders; buckling; postbuckling; perturbation techniques; geometric imperfections; lamination defects;
D O I：
暂无
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
The buckling behaviour of composite cylinders is highly influenced by the presence of geometric imperfections and other factors that can cause big discrepancies between experimental loads and analytical values. The influence of the geometric imperfections has been widely analysed in steel shells and only recently it has been tackled also for composite shells. In this work the effects of geometric imperfections and other defects due to the manufacturing process, like the thickness variations or possible misalignments of the fibers from the nominal directions, are analysed with the objective of producing relevant suggestions for the designers. The research is aimed at providing scientific background for a better exploitation of the material properties and defining the influence of the processing conditions on the product performance.
引用
收藏
页码：279 / 287
页数：9
相关论文
共 50 条
  • [1] Buckling of axially compressed composite cylinders with geometric imperfections
    Taheri-Behrooz, Fathollah
    Omidi, Milad
    STEEL AND COMPOSITE STRUCTURES, 2018, 29 (04) : 557 - 567
  • [2] The effect of geometric imperfections on the buckling behaviour of composite laminated cylinders under external hydrostatic pressure
    Tsouvalis, NG
    Zafeiratou, AA
    Papazoglou, VJ
    COMPOSITES PART B-ENGINEERING, 2003, 34 (03) : 217 - 226
  • [3] Post-buckling optimization of bending-induced variable stiffness composite cylinders considering worst geometric imperfections
    Ma, Xiangtao
    Wang, Fayao
    Wang, Huiping
    Hao, Peng
    Wang, Bo
    Thin-Walled Structures, 2021, 169
  • [4] PROBABILISTIC DESIGN OF AXIALLY COMPRESSED COMPOSITE CYLINDERS WITH GEOMETRIC AND LOADING IMPERFECTIONS
    Kriegesmann, Benedikt
    Rolfes, Raimund
    INTERNATIONAL JOURNAL OF STRUCTURAL STABILITY AND DYNAMICS, 2010, 10 (04) : 623 - 644
  • [5] The influence of loading eccentricity on the buckling of axially compressed imperfect composite cylinders
    E. Eglitis
    K. Kalnins
    O. Ozolinsh
    Mechanics of Composite Materials, 2010, 46 : 483 - 492
  • [6] THE INFLUENCE OF LOADING ECCENTRICITY ON THE BUCKLING OF AXIALLY COMPRESSED IMPERFECT COMPOSITE CYLINDERS
    Eglitis, E.
    Kalnins, K.
    Ozolinsh, O.
    MECHANICS OF COMPOSITE MATERIALS, 2010, 46 (05) : 483 - 492
  • [7] Influence of defects in carbon nanotubes on their buckling behaviour
    Pavol, Lengvarsky
    Jozef, Bocko
    Alexandr, Shimanovsky
    EXPERIMENTAL STRESS ANALYSIS (EAN 2019), 2019, : 249 - 257
  • [8] Modelling the Effects of Geometric Imperfections on the Buckling and Initial Post-buckling Behaviour of Flat Plates Under Compression Using Measured Data
    Featherston, C. A.
    Eaton, M. J.
    Holford, K. M.
    STRAIN, 2012, 48 (03) : 208 - 215
  • [9] Studies on Buckling Behaviour of the Ship Deck Panels with Imperfections made of Composite Materials
    Chirica, Ionel
    Beznea, Elena-Felicia
    Chirica, Raluca
    MATERIALE PLASTICE, 2009, 46 (03) : 243 - 248
  • [10] Influence of lacing bars on the buckling capacity of four-legged latticed columns considering geometric imperfections
    Li, Yinqi
    Liu, Feng
    Cheng, Wenming
    SCIENCE PROGRESS, 2021, 104 (02)
12345