SURFACE GRAIN COARSENING AND SURFACE SOFTENING DURING MACHINING OF ULTRA-FINE GRAINED TITANIUM

被引：1

作者：

Symonova, A. A. ^{[1
]}

Verezub, O. N. ^{[2
]}

Sycheva, A. A. ^{[3
,4
]}

Verezub, N. V. ^{[1
]}

Havin, V. L. ^{[1
]}

Kaptay, G. ^{[4
,5
]}

机构：

[1] Natl Tech Univ, Dept Integrated Technol Mech Engn, Kharkov Polytech Inst, Kharkov, Ukraine

[2] Univ Miskolc, Dept Prod Engn, Miskolc, Hungary

[3] Univ Miskolc, Hungarian Acad Sci, Mat Sci Res Grp, Miskolc, Hungary

[4] Univ Miskolc, Dept Nanotechnol, Miskolc, Hungary

[5] Bay Zoltan Appl Res Nonprofit Ltd, Miskolc, Hungary

来源：

JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY | 2012年 / 48卷 / 03期

关键词：

Machining; Ultrafine grained metal; Pure titanium; Surface grain coarsening; Microhardness; Softening;

D O I：

10.2298/JMMB121109056S

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Experiments are run to show that different machining conditions applied to ultra-fine grained pure titanium lead to different levels of grain coarsening and softening near the machined surface. Under "hard" machining conditions the upper 40 microns of the machined surface are altered with a decreased microhardness. The experimental results are reasonably reproduced by model calculations. Expanding the parameter field of the model calculations, the surface coarsening diagram and the surface softening diagram due to machining are presented, showing the region of technological parameters, under which neither grain coarsening nor softening takes place along the machined surface.

引用

页码：449 / 459

页数：11

共 50 条

[41] Effects of surface microtopography on material removal and ultra-smooth surface creation processes in ultraviolet-induced nanoparticle colloid jet machining
Song, Xiaozong
Niu, Yanjiang
Gao, Gui
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 2022, 648
[42] DIAGNOSTICS OF WORKPIECE SURFACE CONDITION BASED ON CUTTING TOOL VIBRATIONS DURING MACHINING
Jozwik, Jerzy
Mika, Dariusz
ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2015, 9 (26) : 57 - 65
[43] Numerical simulation of surface modification during machining of nickel-based superalloy
Caruso, Serafino
Imbrogno, Stano
Rotella, Giovanna
Imaz Ciaran, Mikel
Arrazola, Pedro J.
Filice, Luigino
Umbrello, Domenico
15TH CIRP CONFERENCE ON MODELLING OF MACHINING OPERATIONS (15TH CMMO), 2015, 31 : 130 - 135
[44] Understanding the surface grain refinement mechanisms for type 316L stainless steel during machining process via advanced microstructure characterization
Wu, Tao
Liu, Chengpeng
Chang, Litao
Wang, Hanxiao
Zhang, Lifeng
Zhou, Xingtai
MATERIALIA, 2023, 31
[45] Study on microstructure and surface microhardness of laser-assisted machining of TB8 titanium alloy
Sun, Guibin
Xu, Jinkai
Zhai, Changtai
Yu, Huadong
Nie, Xiaoyu
Tian, Jiwen
2021 IEEE INTERNATIONAL CONFERENCE ON MANIPULATION, MANUFACTURING AND MEASUREMENT ON THE NANOSCALE (3M-NANO), 2021, : 205 - 209
[46] Investigations into the surface quality and micro-hardness in the ultrasonic machining of titanium (ASTM GRADE-1)
Kumar, Jatinder
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2014, 36 (04) : 807 - 823
[47] Investigations into the surface quality and micro-hardness in the ultrasonic machining of titanium (ASTM GRADE-1)
Jatinder Kumar
Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2014, 36 : 807 - 823
[48] Effect of Surface Micro-Hardness Change in Multistep Machining on Friction and Wear Characteristics of Titanium Alloy
Hou, Guanming
Li, Anhai
APPLIED SCIENCES-BASEL, 2021, 11 (16):
[49] Effect of Machining Process on Surface Microhardness of Titanium Carbide Reinforced Aluminium LM6 Composite
Yusuf, Muhammad
Ariffin, M. K. A.
Ismail, N.
Sulaiman, S.
ADVANCES IN MECHANICAL AND MANUFACTURING ENGINEERING, 2014, 564 : 495 - 500
[50] Influence of cutting friction on anisotropy of surface properties in ultra-precision machining of brittle single crystals
Cheung, CF
SCRIPTA MATERIALIA, 2003, 48 (08) : 1213 - 1218

← 1 2 3 4 5 →