Torsional behavior of ultra-high performance concrete squared beams

被引：63

作者：

Yang, In-Hwan ^{[1
]}

Joh, Changbin ^{[2
]}

Lee, Jung Woo ^{[2
]}

Kim, Byung-Suk ^{[3
]}

机构：

[1] Kunsan Natl Univ, Dept Civil Engn, Kunsan 573701, Jeonbuk, South Korea

[2] Korea Inst Construct Technol, Struct Engn Res Div, Goyang 411712, Gyeonggi, South Korea

[3] Korea Inst Construct Technol, SOC Res Inst, Goyang 411712, Gyeonggi, South Korea

来源：

ENGINEERING STRUCTURES | 2013年 / 56卷

关键词：

Ultra-high performance concrete (UHPC); Steel fiber; Crack; Torsional strength; Diagonal compressive stresses; HOLLOW BEAMS; STRENGTH; DESIGN;

D O I：

10.1016/j.engstruct.2013.05.027

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

This paper presents experimental results on the torsional behavior of ultra-high performance concrete (UHPC) beams. Thirteen beam specimens with 300 x 300-mm cross section were cast from UHPC with the compressive strengths greater than 150 MPa. The experimental parameters were the specimens' volume fraction of steel fibers, transverse reinforcement ratio, and longitudinal reinforcement ratio. The test results indicated that the beams' initial cracking and ultimate torsional strength increased as the volume fraction of steel fibers increased. The ultimate torsional strength and torsional stiffness after initial cracking increased as the stirrup ratios increased, and ultimate torsional strength increased as the longitudinal rebar ratios increased. The effect of the quantity of transverse and longitudinal reinforcement on the angle of the diagonal compressive stresses was investigated. The results of this study provided valuable data that could be used in future studies to develop computational models of the torsional behavior of UHPC beams and predict their ultimate strength. (C) 2013 Elsevier Ltd. All rights reserved.

引用

页码：372 / 383

页数：12

共 34 条

[1]

Afgc, 2002, BET FIBR ULTR PERF

[2] Experimental study of externally prestressed segmental beam under torsion [J].