Effect of ceramic and resin cement type on color stability and translucency of ceramic laminate veneers for diastema closure: an in vitro study

To investigate the effect of resin cements on the color stability and translucency of ceramic laminate veneers used for diastema closure. Sixty resin abutments were prepared for ceramic laminate veneers and divided into six groups according to the ceramic type (lithium disilicate, zirconia-reinforced lithium silicate, and translucent zirconia) and the cement type (Variolink Esthetic LC and RelyX Veneer). Color coordinates and translucency were analyzed after cementation and after soaking in the coffee solution. Differences in color and translucency were estimated, and results were statistically assessed (alpha=0.05). Ceramic materials showed a significant impact on color changes after soaking in coffee within Variolink Esthetic groups. Translucent zirconia showed the highest color change, followed by zirconia reinforced lithium silicate and lithium disilicate. Ceramic materials showed a significant impact among the RelyX Veneer groups. A significant interaction in color changes was found between ceramic types and cement types after cementation, and after soaking in coffee was found. All groups showed a clinically acceptable difference in translucency parameters after soaking in coffee. The resin cement affects the color and translucency of ceramic laminate veneers used for diastema closure, and ceramic laminate veneers bonded with Variolink Esthetic LC resin cement are more translucent, while ceramic laminate veneers bonded with RelyX Veneer resin are more resistant to coffee staining. The lithium disilicate laminate veneer is more resistant to coffee staining than zirconia reinforced lithium silicate and translucent zirconia laminate veneers used for diastema closure.