Design and characterization of in-situ TiB reinforced TiB/Ti50Zr25Al15Cu10 non-equiatomic medium-entropy alloy composite coating on magnesium alloy by laser cladding

被引：27
作者：
Jiang, Lipeng [1 ]
Cui, Xiufang [1 ]
Jin, Guo [1 ]
Tian, Zhimin [3 ]
Wen, Xin [1 ]
Tian, Haoliang [2 ]
Wang, Shuo [1 ]
机构：
[1] Harbin Engn Univ, Coll Mat Sci & Chem Engn, Inst Surface Interface Sci & Technol,Minist Educ, Key Lab Superlight Mat & Surface Technol, Harbin 150001, Peoples R China
[2] Beijing Inst Aeronaut Mat, Aviat Key Lab Sci & Technol Adv Corros & Protect, Beijing 100095, Peoples R China
[3] PLA, AMS, Inst Def Engn, Beijing 100850, Peoples R China
来源：
OPTICS AND LASER TECHNOLOGY | 2022年 / 156卷
基金：
中国国家自然科学基金;
关键词：
Laser cladding; Magnesium alloy; Medium-entropy alloy composite coating; Corrosion resistance; Wear resistance; RARE-EARTH-OXIDE; MECHANICAL-PROPERTIES; CORROSION BEHAVIOR; WEAR-RESISTANCE; SOLIDIFICATION BEHAVIOR; MICROSTRUCTURE; SURFACE; ALUMINUM; GROWTH; LAYER;
D O I：
10.1016/j.optlastec.2022.108494
中图分类号：
O43 [光学];
学科分类号：
070207 ; 0803 ;
摘要：
The improvement of corrosion resistance and wear resistance levels is of great significance because of the farranging impacts of them on the further application of magnesium alloys. In this work, a novel TiB/Ti50Zr25Al15Cu10 medium-entropy alloy composite coating (MEACC) was successfully prepared on the surface of magnesium alloy by laser cladding. The effect of LaB6 content on microstructure, micro-hardness, wear resistance and corrosion resistance of Ti50Zr25Al15Cu10 coatings was studied in detail. The results show that TiB/Ti50Zr25Al15Cu10 MEACCs are mainly composed of alpha-Ti, BCC and TiB phases. With LaB6 content increased, the microstructure of the coating is refined and homogenized. And when the addition amount is excessive, Cu2La clusters appear. The lattice distortion caused by La3+ with large ion radius leading to the formation of hard BCC solid solution, as well as the dispersion strengthening of TiB in-situ, the coating presents high micro-hardness and excellent wear resistance. Especially, the average micro-hardness values of Ti50Zr25Al15Cu10 coating with 4 wt% LaB6 is similar to 679.4 HV0.3, which is about 11 times than that of the substrate (similar to 61.6 HV0.3). Besides, TiB/Ti50Zr25Al15Cu10 MEACC displays excellent corrosion resistance. The minimum corrosion current density is 8.52 x 10(-7) A center dot cm(-2), and the oxidation phenomenon emerged in the coating. The oxide film is mainly composed of the oxidation state of Ti, Zr, Al, Cu and the sub-oxide state of Cu.
引用
收藏
页数：15
相关论文
共 81 条
[51]   Effects of temperature on mechanical properties and deformation mechanisms of the equiatomic CrFeNi medium-entropy alloy [J].
Schneider, Mike ;
Laplanche, Guillaume .
ACTA MATERIALIA, 2021, 204
[52]   Reassessment of the binary aluminum-titanium phase diagram [J].
Schuster, Julius C. ;
Palm, Martin .
JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION, 2006, 27 (03) :255-277
[53]   Dry sliding adhesive wear characteristics of Fe-based hardfacing alloys with different CeO2 additives - A statistical analysis [J].
Singla, Yogesh Kumar ;
Arora, Navneet ;
Dwivedi, D. K. .
TRIBOLOGY INTERNATIONAL, 2017, 105 :229-240
[54]   Local lattice distortion in high-entropy alloys [J].
Song, Hongquan ;
Tian, Fuyang ;
Hu, Qing-Miao ;
Vitos, Levente ;
Wang, Yandong ;
Shen, Jiang ;
Chen, Nanxian .
PHYSICAL REVIEW MATERIALS, 2017, 1 (02)
[55]   Laser cladding Al-based amorphous-nanocrystalline composite coatings on AZ80 magnesium alloy under water cooling condition [J].
Tan, Chaolin ;
Zhu, Hongmei ;
Kuang, Tongchun ;
Shi, Jeffery ;
Liu, Hongwei ;
Liu, Zongwen .
JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 690 :108-115
[56]   Effect of RE oxides on the microstructure of the coatings fabricated on titanium alloys by laser alloying technique [J].
Tian, YS ;
Chen, CZ ;
Chen, LX ;
Huo, QH .
SCRIPTA MATERIALIA, 2006, 54 (05) :847-852
[57]   STRUCTURE AND GROWTH OF THIN FILMS ON METALS EXPOSED TO OXYGEN [J].
UHLIG, HH .
CORROSION SCIENCE, 1967, 7 (06) :325-+
[58]   Microstructural characteristics of laser clad coatings with rare earth metal elements [J].
Wang, KL ;
Zhang, QB ;
Sun, ML ;
Wei, XG .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 139 (1-3) :448-452
[59]   Structural and Electrochemical Characteristics of Ca-Doped "Flower-like" Li4Ti5O12 Motifs as High-Rate Anode Materials for Lithium-Ion Batteries [J].
Wang, Lei ;
Zhang, Yiman ;
Guo, Haoyue ;
Li, Jing ;
Stach, Eric A. ;
Tong, Xiao ;
Takeuchi, Esther S. ;
Takeuchi, Kenneth J. ;
Liu, Ping ;
Marschilok, Amy C. ;
Wong, Stanislaus S. .
CHEMISTRY OF MATERIALS, 2018, 30 (03) :671-684
[60]   EIS study of a self-repairing microarc oxidation coating [J].
Wen, Lei ;
Wang, Y. M. ;
Liu, Yan ;
Zhou, Y. ;
Guo, L. X. ;
Ouyang, J. H. ;
Jia, D. C. .
CORROSION SCIENCE, 2011, 53 (02) :618-623
123456789