Effect of Surface-Modified Ammonium Polyphosphate with KH550 and Silicon Resin on the Flame Retardancy, Water Resistance, Mechanical and Thermal Properties of Intumescent Flame Retardant Polypropylene

被引:79
作者
Liu, Jian-Chao [1 ]
Xu, Miao-Jun [1 ]
Lai, Tao [1 ]
Li, Bin [1 ]
机构
[1] Northeast Forestry Univ, Heilongjiang Key Lab Mol Design & Preparat Flame, Coll Sci, Harbin 150040, Heilongjiang, Peoples R China
基金
中国博士后科学基金;
关键词
FIRE-RETARDANCY; COMPOSITES; SYSTEM; AGENT; POLYETHYLENE; WETTABILITY; DEGRADATION; PERFORMANCE; COPOLYMER; POLYMERS;
D O I
10.1021/acs.iecr.5b01670
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
Ammonium polyphosphate (APP), which is an important component of intumescent flame retardant (IFR), has been modified with (3-aminopropyl) triethoxysilane (KH550) and silicon resin to enhance its hydrophobic properties. The structure and properties of the modified ammonium polyphosphate (MAPP) were well-characterized by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy (SEM), and water contact angle (CA). The water CA of MAPP was as high as 148 degrees, which demonstrated that MAPP possessed excellent hydrophobic properties. MAPP and APP were mixed with triazine, which is a char-foaming agent (CFA), and polypropylene (PP) to prepare PP/MAPP/CFA and PP/APP/CFA composites, respectively. The fire retardancy and thermal degradation behavior of PP/MAPP/CFA and PP/APP/CFA composites were investigated by limiting oxygen index (LOI), vertical burning test (UL-94), cone calorimetry, and thermogravimetric analysis. The surface and fracture morphologies were evaluated by SEM. The mechanical properties was analyzed by tensile, flexural, and izod impact tests. The results demonstrated that the MAPP imparted excellent flame retardancy of PP/MAPP/CFA systems, along with a higher LOI value, UL-94 rating, and lower heat release rate and total heat released values. The modification enhanced the interfacial adhesion, mechanical stability, and thermal stability of PP/MAPP/CFA composites. Moreover, PP/MAPP/CFA composites with the thickness of 1.6 mm can still pass the UL-94 V-0 rating after treatment with water for 168 h at 70 degrees C, meanwhile the weight loss rate was decreased from 2.31% for PP/APP/CFA composites to 0.85%, indicating excellent water resistance. This investigation shows a promising formulation for water-resistant intumescent flame-retardant PP composites with extraordinary properties.
引用
收藏
页码:9733 / 9741
页数:9
相关论文
共 47 条
[31]   Flame retardant effects of magnesium hydroxide [J].
Rothon, RN ;
Hornsby, PR .
POLYMER DEGRADATION AND STABILITY, 1996, 54 (2-3) :383-385
[32]   Bioinspired surfaces with special wettability [J].
Sun, TL ;
Feng, L ;
Gao, XF ;
Jiang, L .
ACCOUNTS OF CHEMICAL RESEARCH, 2005, 38 (08) :644-652
[33]   Synergistic Effect between a Novel Char Forming Agent and Ammonium Polyphosphate on Flame Retardancy and Thermal Properties of Polypropylene [J].
Tian, Nana ;
Wen, Xin ;
Jiang, Zhiwei ;
Gong, Jiang ;
Wang, Yanhui ;
Xue, Jian ;
Tang, Tao .
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2013, 52 (32) :10905-10915
[34]  
VENUGOPALAN MV, 1989, BIOL FERT SOILS, V8, P325, DOI 10.1007/BF00263163
[35]   Polypropylene fabrics padded with microencapsulated ammonium phosphate: Effect of the shell structure on the thermal stability and fire performance [J].
Vroman, I. ;
Giraud, S. ;
Salauen, F. ;
Bourbigot, S. .
POLYMER DEGRADATION AND STABILITY, 2010, 95 (09) :1716-1720
[36]   Preparation of silane precursor microencapsulated intumescent flame retardant and its enhancement on the properties of ethylene-vinyl acetate copolymer cable [J].
Wang, Bibo ;
Wang, Xiaofeng ;
Tang, Gang ;
Shi, Yongqian ;
Hu, Weizhao ;
Lu, Hongdian ;
Song, Lei ;
Hu, Yuan .
COMPOSITES SCIENCE AND TECHNOLOGY, 2012, 72 (09) :1042-1048
[37]   Effect of Cellulose Acetate Butyrate Microencapsulated Ammonium Polyphosphate on the Flame Retardancy, Mechanical, Electrical, and Thermal Properties of Intumescent Flame-Retardant Ethylene-Vinyl Acetate Copolymer/Microencapsulated Ammonium Polyphosphate/Polyamide-6 Blends [J].
Wang, Bibo ;
Tang, Qinbo ;
Hong, Ningning ;
Song, Lei ;
Wang, Lei ;
Shi, Yongqian ;
Hu, Yuan .
ACS APPLIED MATERIALS & INTERFACES, 2011, 3 (09) :3754-3761
[38]   Fire retardancy of a reactively extruded intumescent flame retardant polyethylene system enhanced by metal chelates [J].
Wang, De-Yi ;
Liu, Yun ;
Wang, Yu-Zhong ;
Artiles, C. Perdorno ;
Hull, T. Richard ;
Price, Dennis .
POLYMER DEGRADATION AND STABILITY, 2007, 92 (08) :1592-1598
[39]   Performance of an intumescent-flame-retardant master batch synthesized by twin-screw reactive extrusion: effect of the polypropylene carrier resin [J].
Wang, Q ;
Chen, YH ;
Liu, Y ;
Yin, H ;
Aelmans, N ;
Kierkeis, R .
POLYMER INTERNATIONAL, 2004, 53 (04) :439-448
[40]   Flame retardants in commercial use or development for polyolefins [J].
Weil, Ebward A. ;
Levchik, Sergei V. .
JOURNAL OF FIRE SCIENCES, 2008, 26 (01) :5-43