CAN-bus in a closed loop hydraulic position servo

被引：0

作者：

Inberg, J ^{[1
]}

Lehto, E ^{[1
]}

Virvalo, T ^{[1
]}

机构：

[1] Tampere Univ Technol, Inst Hydraul & Automat, FIN-33101 Tampere, Finland

来源：

PROCEEDINGS OF THE FIFTH INTERNATIONAL CONFERENCE ON FLUID POWER TRANSMISSION AND CONTROL (ICFP'2001) | 2001年

关键词：

CAN-bus; field bus; CANopen; position servo;

D O I：

暂无

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

CAN-bus is one of the most common data buses used in real time hydraulic control systems. The manufacturers of hydraulic components have also developed valves and accessories, which are available with CAN-bus interface. This paper concentrates on the closed loop hydraulic position servo realised with CAN-bus. Four different solutions to realise an electrohydraulic position servo system are presented in this paper. The normal system without any CAN-bus is used as a reference system. The other three systems studied are: CAN-bus in the forward loop between the controller and the valve, CAN-bus in the feedback loop between the position transducer and the controller and CAN-bus in the forward and feedback loops. State controller is used in each case, The influence of the sampling time, the baud rate of CAN-bus and the data transfer delays are studied and compared.

引用

页码：46 / 50

页数：5

共 50 条

[21] 浅析汽车CAN-BUS的故障诊断
孙保海
汽车实用技术, 2020, (08) : 147 - 148+169
[22] Design a digital rotational speed sensor based on CAN-BUS
Zhang, XM
Li, LQ
Liu, JM
Qiao, XY
ISTM/2005: 6th International Symposium on Test and Measurement, Vols 1-9, Conference Proceedings, 2005, : 3486 - 3488
[23] 汽车CAN-BUS总线故障及波形分析
逯海燕
时代汽车, 2016, (09) : 79 - 81
[24] Utilizing CAN-Bus and Smartphones to Enforce Safe and Responsible Driving
Taha, Abd-Elhamid M.
Nasser, Nidal
2015 IEEE SYMPOSIUM ON COMPUTERS AND COMMUNICATION (ISCC), 2015, : 111 - 115
[25] 耐高温发泡CAN-Bus电缆的研制
蒋宝军
姜茂盛
张尚勇
光纤与电缆及其应用技术, 2014, (06) : 34 - 35
[26] Application of can-bus in embedded vehicle body control system
Liu, Yanxia
Li, Shufen
Song, Yuqiu
2009 WASE INTERNATIONAL CONFERENCE ON INFORMATION ENGINEERING, ICIE 2009, VOL II, 2009, : 261 - +
[27] CAN-bus Intelligent Network Communication Equipment Based on PLC
Liu, Yani
GREEN POWER, MATERIALS AND MANUFACTURING TECHNOLOGY AND APPLICATIONS III, PTS 1 AND 2, 2014, 484-485 : 1017 - 1021
[28] ARM Distributed Numerical Control System Design Based on CAN-Bus
Fei Jiyou
Gao Bin
Wen Jingyan
AUTOMATIC CONTROL AND MECHATRONIC ENGINEERING II, 2013, 415 : 113 - +
[29] Design of Intelligent System of Detection Technology Lab Based on CAN-bus
Tan, Boxue
Ma, Lixiu
Li, Tianze
Zhang, Xia
Li, Chao
PROCEEDINGS OF 2010 ASIA-PACIFIC YOUTH CONFERENCE ON COMMUNICATION, VOLS 1 AND 2, 2010, : 545 - 548
[30] Virtual serial port in the construction of the CAN-bus network technology research
Tu Li
Liu Jun'an
Song Juanjuan
SMART MATERIALS AND INTELLIGENT SYSTEMS, PTS 1 AND 2, 2011, 143-144 : 698 - +

← 1 2 3 4 5 →