Mechanical and physical properties of recycled cellulose fibre-reinforced epoxy eco-composites

被引：1
|
作者：
Sommers, J. [1 ]
Kho, H. S. [2 ]
Al-Ghamedi, R. [1 ]
Low, I. M. [1 ]
Davies, I. J. [2 ]
Latella, B. A. [3 ]
机构：
[1] Curtin Univ Technol, Dept Imaging &Applied Phys, GPO Box U1987, Perth, WA 684, Australia
[2] Curtin Univ Technol, Dept Mech Engn, Perth, WA 6845, Australia
[3] Australian Nucl Sci & Technol Org, Inst Mat Engn, Menai, NSW 2234, Australia
来源：
STRUCTURAL INTEGRITY AND FAILURE | 2008年 / 41-42卷
关键词：
recycled cellulose fibre; eco-composites; moisture absorption; fracture; crack-bridging;
D O I：
10.4028/www.scientific.net/AMR.41-42.317
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Epoxy composites reinforced with recycled cellulose fibre (RCF) have been synthesized and characterized. The reinforcement by RCF has resulted in a significant increase in the strain at break, fracture toughness and impact toughness but moderate increase in flexural strength and flexural modulus. The effect of seawater soaking on the flexural and impact properties has also been investigated. The micromechanisms of toughening and crack-tip failure processes are identified and discussed in the light of observed microstructures from in-situ and ex-situ fracture.
引用
收藏
页码：317 / +
页数：2
相关论文
共 50 条
  • [21] Modelling of interfacial effects on the mechanical properties of fibre-reinforced composites
    Mahiou, H
    Beakou, A
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 1998, 29 (9-10) : 1035 - 1048
  • [22] Recycled carbon fibre-reinforced polypropylene thermoplastic composites
    Akonda, M. H.
    Lawrence, C. A.
    Weager, B. M.
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2012, 43 (01) : 79 - 86
  • [23] Mechanical Properties of Cellulose and Chitin Reinforced Epoxy Composites
    Gupta, Barun Shankar
    JOURNAL OF CHITIN AND CHITOSAN SCIENCE, 2014, 1 (04) : 311 - 316
  • [24] Mechanical properties of sisal fibre-reinforced polymer composites: a review
    Ibrahim, Idowu David
    Jamiru, Tamba
    Sadiku, Emmanuel R.
    Kupolati, Williams Kehinde
    Agwuncha, Stephen C.
    Ekundayo, Gbenga
    COMPOSITE INTERFACES, 2016, 23 (01) : 15 - 36
  • [25] Mechanical properties of continuous natural fibre-reinforced polymer composites
    Herrera-Franco, PJ
    Valadez-González, A
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2004, 35 (03) : 339 - 345
  • [26] INVESTIGATION OF MECHANICAL AND PHYSICAL PROPERTIES OF DATE PALM STEM FIBRE REINFORCED EPOXY COMPOSITES
    Kumar, S. Mathu
    Rejikumar, R.
    Anand, Mini Jose
    Shebu, M. Mohamed
    MATERIALI IN TEHNOLOGIJE, 2024, 58 (02): : 203 - 208
  • [27] Mechanical recycling and composition effects on the properties and structure of hardwood cellulose-reinforced high density polyethylene eco-composites
    Fonseca-Valero, Carmen
    Ochoa-Mendoza, Almudena
    Arranz-Andres, Javier
    Gonzalez-Sanchez, Carlos
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2015, 69 : 94 - 104
  • [28] Study of mechanical properties on abaca/sisal fibre-reinforced epoxy resin-based hybrid composites
    Rajaram, Srinivasan
    Venkatesan, K.
    Jenish, I.
    Bhaskar, G. B.
    BIOMASS CONVERSION AND BIOREFINERY, 2024, 14 (12) : 13431 - 13444
  • [29] Eco-composites using natural fibers and their mechanical properties
    Okubo, K
    Fujii, T
    HIGH PERFORMANCE STRUCTURES AND COMPOSITES, 2002, 4 : 77 - 85
  • [30] State of the Art: Natural fibre-reinforced composites in advanced development and their physical/chemical/mechanical properties
    Karthik, Krishnasamy
    Rajamanikkam, Ramesh kumar
    Venkatesan, Elumalai Perumal
    Bishwakarma, Sunil
    Krishnaiah, Ravi
    Saleel, C. Ahamed
    Soudagar, Manzoore Elahi M.
    Kalam, M. A.
    Ali, Muhammad Mahmood
    Bashir, Muhammad Nasir
    CHINESE JOURNAL OF ANALYTICAL CHEMISTRY, 2024, 52 (07)
12345