Burr formation in micro-machining aluminum, 6061-T6

被引：0
|
作者：
Lee, K [1 ]
Stirn, B [1 ]
Dornfeld, DA [1 ]
机构：
[1] Univ Calif Berkeley, Dept Mech Engn, Berkeley, CA 94720 USA
来源：
INITIATIVES OF PRECISION ENGINEERING AT THE BEGINNING OF A MILLENNIUM | 2001年
关键词：
burr formation; micro-machining; drilling; milling;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Experimental studies on micro-milling and micro-drilling in aluminum 6061-T6 have been carried out. A range of different cutting speeds, chip loads and depths of cut using a tool of 127 mum diameter were considered. Drilling experiments with different feed to diameter ratios, cutting speeds and two drill diameters were conducted. The influence of the cutting parameters on burr size and burr type was observed. A comparison to burr formation in conventional machining is presented.
引用
收藏
页码：47 / 51
页数：5
相关论文
共 37 条
  • [1] BURR SIZE MINIMIZATION WHEN DRILLING 6061-T6 ALUMINUM ALLOY
    Zedan, Y.
    Niknam, S. A.
    Djebara, A.
    Songmene, V.
    INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION - 2012, VOL 3, PTS A-C: DESIGN, MATERIALS, AND MANUFACTURING, 2013, : 1053 - 1059
  • [2] Burr height model for vibration assisted drilling of aluminum 6061-T6
    Chang, Simon S. F.
    Bone, Gary M.
    PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2010, 34 (03): : 369 - 375
  • [3] Finite element analysis of burr formation in micro-machining
    Huang, Juan
    Xiong, Yonghua
    Huang, Jingui
    Wang, Guicheng
    MECHANICAL STRUCTURES AND SMART MATERIALS, 2014, 487 : 225 - 229
  • [4] Study on burr formation in micro-machining using micro-tools fabricated by micro-EDM
    Chern, Gwo-Lianq
    Wu, Ying-Jeng Engin
    Cheng, Jyun-Cheng
    Yao, Jian-Cheng
    PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2007, 31 (02): : 122 - 129
  • [5] 3D finite element prediction of chip flow, burr formation, and cutting forces in micro end-milling of aluminum 6061-T6
    A. Davoudinejad
    P. Parenti
    M. Annoni
    Frontiers of Mechanical Engineering, 2017, 12 : 203 - 214
  • [6] 3D finite element prediction of chip flow, burr formation, and cutting forces in micro end-milling of aluminum 6061-T6
    Davoudinejad, A.
    Parenti, P.
    Annoni, M.
    FRONTIERS OF MECHANICAL ENGINEERING, 2017, 12 (02) : 203 - 214
  • [7] Statistical Analysis of Machining Parameters on Burr Formation, Surface Roughness and Energy Consumption during Milling of Aluminium Alloy Al 6061-T6
    Zaidi, Sajid Raza
    Ul Qadir, Najam
    Jaffery, Syed Husain Imran
    Khan, Muhammad Ali
    Khan, Mushtaq
    Petru, Jana
    MATERIALS, 2022, 15 (22)
  • [8] Development of energy consumption map for orthogonal machining of Al 6061-T6 alloy
    Warsi, Salman Sagheer
    Jaffery, Syed Husain Imran
    Ahmad, Riaz
    Khan, Mushtaq
    Ali, Liaqat
    Agha, Mujtaba Hassan
    Akram, Sohail
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2018, 232 (14) : 2510 - 2522
  • [9] Thrust force model for vibration-assisted drilling of aluminum 6061-T6
    Chang, Simon S. F.
    Bone, Gary M.
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2009, 49 (14) : 1070 - 1076
  • [10] Residual stresses and surface damage when micromachining 6061-T6 aluminum alloy
    Sadat, Abdul
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, 130 (9-10) : 4469 - 4477
1234