Optimization of the anode current collector layer thickness for the cathode-supported solid oxide fuel cell

被引：5
|
作者：
Kong, Wei [1 ]
Su, Shichuan [1 ]
Gao, Xiang [1 ]
Zhang, Donghui [1 ]
Yu, Zidong [1 ]
机构：
[1] Jiangsu Univ Sci & Technol, Sch Energy & Power Engn, Zhenjiang 212003, Peoples R China
来源：
ADVANCES IN MANUFACTURING SCIENCE AND ENGINEERING, PTS 1-4 | 2013年 / 712-715卷
关键词：
Cathode-supported Solid oxide fuel cell; Anode thickness; Optimization design; Porosity; Pitch; PERFORMANCE; POLARIZATION; TEMPERATURE; ELECTROLYTE;
D O I：
10.4028/www.scientific.net/AMR.712-715.1325
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The influence of anode current collector layer (ACCL) thickness is studied for different ACCL porosity and different pitch width. The results shows conclusively that the output current density depends strongly on the ACCL thickness and a suitable choice of the ACCL thickness is very important for the high performance of a SOFC stack. Furthermore, the optimal ACCL thickness is found to be dependent linearly on the pitch width and the parameters for the linearity are given.
引用
收藏
页码：1325 / 1329
页数：5
相关论文
共 50 条
  • [1] Optimization of the Interconnect Ribs for a Cathode-Supported Solid Oxide Fuel Cell
    Kong, Wei
    Gao, Xiang
    Liu, Shixue
    Su, Shichuan
    Chen, Daifen
    ENERGIES, 2014, 7 (01): : 295 - 313
  • [2] Optimization of Distributed Cylindrical Interconnect Ribs for Anode- and Cathode-Supported Solid Oxide Fuel Cell
    Gao, Xiang
    Zhang, Qiang
    Zhang, Wenxuan
    Chen, Daifen
    INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2015, 10 (09): : 7521 - 7534
  • [3] Fabrication and characterization of the anode-supported solid oxide fuel cell with Ni current collector layer
    Kao, Wei-Xin
    Lin, Tai-Nan
    Lee, Maw-Chwain
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2015, 123 (1436) : 217 - 221
  • [4] Fabrication and characterization of a cathode-supported tubular solid oxide fuel cell
    Zhao, Chunhua
    Liu, Renzhu
    Wang, Shaorong
    Wang, Zhenrong
    Qian, Jiqin
    Wen, Tinglian
    JOURNAL OF POWER SOURCES, 2009, 192 (02) : 552 - 555
  • [5] Infiltrated porous YSZ as a cathode active layer for cathode-supported solid oxide fuel cells
    Yuan, Chun
    Luo, Ting
    Li, Junliang
    Meng, Xie
    Qian, Jiqin
    Ye, Xiaofeng
    Zhan, Zhongliang
    Xia, Changrong
    Wang, Shaorong
    ELECTROCHEMISTRY COMMUNICATIONS, 2014, 46 : 40 - 43
  • [6] Geometry-Dependent Oxygen Diffusion Flux and Limiting Current Density of the Cathode in a Cathode-Supported Solid Oxide Fuel Cell
    Huang, Kevin
    Shull, James L.
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2011, 158 (02) : B84 - B90
  • [7] Composite contacting interlayer as cathode current collector for anode-supported planar solid oxide fuel cell stack
    Bao, Weitao
    Ren, Xiaoqin
    JOURNAL OF POWER SOURCES, 2014, 249 : 193 - 196
  • [8] Cathode-supported tubular solid oxide fuel cell technology: A critical review
    Huang, Kevin
    Singhal, Subhash C.
    JOURNAL OF POWER SOURCES, 2013, 237 : 84 - 97
  • [9] Optimization of Cathode Structure for Anode-Supported Planar Solid Oxide Fuel Cell
    Fan, Shengliang
    Wang, Guoli
    Yang, Lei
    Liu, Pengwei
    Han, Xu
    Jin, Zunlong
    JOURNAL OF ELECTROCHEMICAL ENERGY CONVERSION AND STORAGE, 2022, 19 (02)
  • [10] Effects of CuO addition to anode on the electrochemical performances of cathode-supported solid oxide fuel cells
    Zhao, C. H.
    Liu, R. Z.
    Shao, L.
    Wang, S. R.
    Wen, T. L.
    ELECTROCHEMISTRY COMMUNICATIONS, 2009, 11 (12) : 2300 - 2303
12345