Characteristics of nucleation and transformation sequence in deformation-induced martensitic transformation

被引：48
作者：
Wang, J. L. [1 ]
Huang, M. H. [1 ]
Xi, X. H. [1 ]
Wang, C. C. [1 ]
Xu, W. [1 ]
机构：
[1] Northeastern Univ, State Key Lab Rolling & Automat, Shenyang 110819, Peoples R China
来源：
MATERIALS CHARACTERIZATION | 2020年 / 163卷
基金：
中国国家自然科学基金;
关键词：
Deformation-induced martensitic transformation; Austenitic steels; Nucleation; Transformation sequence; TRIP effect; Ex-situ EBSD; X-RAY-DIFFRACTION; MECHANICAL-PROPERTIES; STAINLESS-STEEL; RETAINED AUSTENITE; TENSILE; TEMPERATURE; MN; KINETICS; STRESS; MORPHOLOGIES;
D O I：
10.1016/j.matchar.2020.110234
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
To elucidate the characteristics of the nucleation and transformation of deformation-induced martensitic transformation, detailed characterisations were performed during quasi-in-situ tensile deformation. Two possible transformation scenarios were simultaneously observed and investigated in detail. epsilon-Martensite initiated within the slip band is the most preferential nucleation site instead of slip band intersections as assumed in the classical theory. The correlation between the two transformation sequences is discussed and associated with strain and stress conditions. Characteristics of the nucleation and transformation sequence upon deformation are compared to thermal martensitic transformation; systematic similarity is discovered, implying the underlying shared nature of thermal and mechanical stabilities.
引用
收藏
页数：5
相关论文
共 35 条
[1]   INFLUENCE OF POLYCRYSTAL GRAIN SIZE ON SEVERAL MECHANICAL PROPERTIES OF MATERIALS [J].
ARMSTRONG, RW .
METALLURGICAL TRANSACTIONS, 1970, 1 (05) :1169-+
[2]   High-energy X-ray diffraction study on the temperature-dependent mechanical stability of retained austenite in low-alloyed TRIP steels [J].
Blonde, R. ;
Jimenez-Melero, E. ;
Zhao, L. ;
Wright, J. P. ;
Bruck, E. ;
van der Zwaag, S. ;
van Dijk, N. H. .
ACTA MATERIALIA, 2012, 60 (02) :565-577
[3]   In-situ synchrotron diffraction and digital image correlation technique for characterizations of retained austenite stability in low-alloyed transformation induced plasticity steel [J].
Brauser, S. ;
Kromm, A. ;
Kannengiesser, Th. ;
Rethmeier, M. .
SCRIPTA MATERIALIA, 2010, 63 (12) :1149-1152
[4]   Significance of interplay between austenite stability and deformation mechanisms in governing three-stage work hardening behavior of phase-reversion induced nanograined/ultrafine-grained (NG/UFG) stainless steels with high strength-high ductility combination [J].
Challa, V. S. A. ;
Wan, X. L. ;
Somani, M. C. ;
Karjalainen, L. P. ;
Misra, R. D. K. .
SCRIPTA MATERIALIA, 2014, 86 :60-63
[5]   The effect of strain-induced martensitic transformation on mechanical properties of TRIP steel [J].
Dan, W. J. ;
Li, S. H. ;
Zhang, W. G. ;
Lin, Z. Q. .
MATERIALS & DESIGN, 2008, 29 (03) :604-612
[6]   Morphologies and characteristics of deformation induced martensite during tensile deformation of 304 LN stainless steel [J].
Das, Arpan ;
Sivaprasad, S. ;
Ghosh, M. ;
Chakraborti, P. C. ;
Tarafder, S. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 486 (1-2) :283-286
[7]   Morphologies and characteristics of deformation induced martensite during low cycle fatigue behaviour of austenitic stainless steel [J].
Das, Arpan ;
Sivaprasad, S. ;
Chakraborti, P. C. ;
Tarafder, S. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (27) :7909-7914
[8]   Quantitative measurement of deformation-induced martensite in 304 stainless steel by X-ray diffraction [J].
De, AK ;
Murdock, DC ;
Mataya, MC ;
Speer, JG ;
Matlock, DK .
SCRIPTA MATERIALIA, 2004, 50 (12) :1445-1449
[9]   Kinetics of strain-induced transformation of dispersed austenite in low-alloy TRIP steels [J].
Haidemenopoulos, G. N. ;
Aravas, N. ;
Bellas, I. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 615 :416-423
[10]   RELATION BETWEEN APPLIED STRESS AND ORIENTATION RELATIONSHIP OF ALPHA' MARTENSITE IN STAINLESS-STEEL SINGLE-CRYSTALS [J].
HIGO, Y ;
LECROISEY, F ;
MORI, T .
ACTA METALLURGICA, 1974, 22 (03) :313-323
1234