Experimental and analytical investigations on the behavior of interface between concrete and polymer cement mortar under hygrothermal conditions

被引：84

作者：

Rashid, Khuram ^{[1
]}

Ueda, Tamon ^{[2
]}

Zhang, Dawei ^{[3
]}

Miyaguchi, Katsushi

Nakai, Hiroshi

机构：

[1] Hokkaido Univ, Grad Sch Engn, Sapporo, Hokkaido 060, Japan

[2] Hokkaido Univ, Fac Engn, Sapporo, Hokkaido 060, Japan

[3] Zhejiang Univ, Inst Struct Engn, Hangzhou, Zhejiang, Peoples R China

来源：

CONSTRUCTION AND BUILDING MATERIALS | 2015年 / 94卷

关键词：

Concrete; Polymer cement mortar; Interface; Tensile strength; Temperature; Moisture; TO-OLD CONCRETE; REPAIR MATERIALS; TRANSITION ZONE; PORE STRUCTURE; BOND STRENGTH; COMPATIBILITY; PERFORMANCE; SUBSTRATE; MODEL;

D O I：

10.1016/j.conbuildmat.2015.07.035

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

This paper presents research outcomes of an experimental program carried out to determine the influence of moisture and temperature on the polymer cement mortar (PCM)-concrete interface properties along with intrinsic properties of constituents. Performance of materials was evaluated using split tensile test of both composite and bulk specimens and also by observing glass transition temperature, melting point and molecular weight of extracted polymers from PCM. All specimens were exposed to different temperature conditions for temperature exposure, or wetting and drying cycles and continuous immersion in water for moisture exposure. Significant reduction in strength was observed of composite and bulk specimens with the increase in temperature, while the effect of moisture was marginal. Finally, design formulas were developed to predict the interfacial split tensile strength under various exposure conditions, by using the control tensile strength of PCM and concrete. (C) 2015 Elsevier Ltd. All rights reserved.

引用

页码：414 / 425

页数：12

共 40 条

[1] Concrete blocks for thermal insulation in hot climate [J].

Al-Jabri, KS ;

Hago, AW ;

Al-Nuaimi, AS ;

Al-Saidy, AH .

CEMENT AND CONCRETE RESEARCH, 2005, 35 (08) :1472-1479

[2] PERFORMANCE OF REPAIR MATERIALS EXPOSED TO FLUCTUATION OF TEMPERATURE [J].

ALGAHTANI, AS ;

RASHEEDUZZAFAR ;

ALMUSSALLAM, AA .

JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 1995, 7 (01) :9-18

[3]

[Anonymous], 2003, C3903 ASTM

[4]

[Anonymous], 2004, C49604 ASTM

[5]

[Anonymous], 2003, E135603 ASTM

[6]

[Anonymous], 2001, B0601 JIS

[7]

Bazant P.Z., 1996, CONCRETE HIGH TEMPER

[8]

BAZANT ZP, 1988, ACI MATER J, V85, P262

[9] FAILURE MODEL OF POLYMER MORTAR [J].

BISWAS, M ;

KELSEY, RG .

JOURNAL OF ENGINEERING MECHANICS, 1991, 117 (05) :1088-1104

[10] Influence of polymer type on adhesion performance of a blended cement mortar [J].

Brien, Joshua V. ;

Mahboub, Kamyar C. .

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2013, 43 :7-13

← 1 2 3 4 →