Oxidative Synthesis of Highly Fluorescent Boron/Nitrogen Co-Doped Carbon Nanodots Enabling Detection of Photosensitizer and Carcinogenic Dye

Current research efforts have demonstrated the facile hydrothermal oxidative synthetic route to develop highly fluorescent boron/nitrogen co-doped carbon nanodots (CNDs). During this process, N-(4-hydroxyphenyl)glycine served as a source of N doping and a carbon precursor as well, while boric acid H3BO3 is used as an oxidizing agent in the N-2 environment. Surface passivation through ultrasonic treatment of CNDs was performed to induce modifications by using various surface passivating agents. Polyethyleneimine (PEI) remarkably enhanced the fluorescence performance and monodispersity of polymerized carbon nanodots (P-CNDs) in aqueous phase with an enhanced quantum yield of 23.71%, along with an increase in size from similar to 3 nm to similar to 200 nm. For characterization of CNDs and P-CNDs, UV, infrared, photoluminescence, transmission electron microscopy, x-ray photoelectron spectra, and atomic force microscopy techniques were utilized. Application potentials of synthesized P-CNDs were developed via introduction of protoporphyrin (PPD, a photosensitizer) which has great doping affinity with polymer PEI to switch-off the fluorescence of P-CNDs, leading to the production of dye-doped nanoprobes. Fluorescence resonance energy transfer (FRET) was also observed during dye-doping, and PPD was detected with a limit of detection (LOD, 3 sigma) of 15 pM. The fluorescence recovery of this switched-off nanoprobe was made possible by using Sudan red III (carcinogenic dye), which was oxidized by PPD doped in P-CNDs. Sudan red III was detected in the concentration range of 9.9 pM-0.37 nM. Meanwhile, it was also confirmed that the dye-doped nanoprobe is highly selective and exceptionally sensitive to detect this carcinogenic agent in commercial products with a LOD (3 sigma) of 90 fM.