Effect of the welding parameters on the surface morphology of resistance spot welded AISI 304 stainless steel joints

被引：5
|
作者：
Cavdar, F. Yildiz [1 ]
Yasar, Huseyin [2 ,3 ]
Cavdar, Kadir [4 ]
机构：
[1] FCB R&D Co, Bursa, Turkey
[2] Bursa Uludag Univ, Mech Engn Dept, Inst Sci, Bursa, Turkey
[3] Rollmech Automot Co, Bursa, Turkey
[4] Univ Bursa Uludag, Fac Engn, Dept Mech Engn, Bursa, Turkey
来源：
MATERIALS TESTING | 2020年 / 62卷 / 07期
关键词：
Resistance spot welding; stainless steel; surface morphology; welding parameters; welding imperfections; STEEL SHEETS; WELDABILITY;
D O I：
10.3139/120.111542
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Resistance spot welding is an extensively used production process in the industry. The joint strength of sheet metal parts bonded by resistance spot welding is expected to be sufficient. Furthermore, it is desirable that the appearance of the welding area be acceptable on visible surfaces. In regard to having an adequate surface appearance on the welded area, is necessary to remove the color changes on the unpainted surfaces and to eliminate the indentations caused by the welding pressure. In this study, an objective evaluation was performed using the color measurements of the test samples joined with resistance spot welding. The effects of welding parameters on surface appearance were investigated and the most suitable settings for the appearance of the welded surface were discussed.
引用
收藏
页码：739 / 743
页数：5
相关论文
共 50 条
  • [21] Application of Taguchi method to determine resistance spot welding conditions of austenitic stainless steel AISI 304
    Thakur, A. G.
    Nandedkar, V. M.
    JOURNAL OF SCIENTIFIC & INDUSTRIAL RESEARCH, 2010, 69 (09): : 680 - 683
  • [22] Optimizing Friction Welding Parameters in AISI 304 Austenitic Stainless Steel and Commercial Copper Dissimilar Joints
    Paventhan, R.
    Thirumalaikumarasamy, D.
    Kantumuchu, Venkata Charan
    Ahmed, Omar Shabbir
    Abbas, Mohamed
    Alahmadi, Ahmad Aziz
    Alwetaishi, Mamdooh
    Alzaed, Ali Nasser
    Ramachandran, Chidambaram Seshadri
    COATINGS, 2023, 13 (02)
  • [23] Effect of welding on the nitriding response of AISI 304 stainless steel
    Sun, Y
    Seow, HP
    HEAT TREATMENT OF METALS, 2004, 31 (01): : 16 - 19
  • [24] Effect of graphene interlayer on resistance spot welded AISI-1008 steel joints
    Das, Tanmoy
    Sahoo, Baidehish
    Kumar, Praveen
    Paul, Jinu
    MATERIALS RESEARCH EXPRESS, 2019, 6 (08)
  • [25] STUDYING THE STRENGTH OF DISSIMILAR JOINTS OF AISI 430 AND 301 STAINLESS STEEL WELDED AT DIFFERENT WELDING PARAMETERS
    Aras, Sedat
    Ertan, Rukiye
    MATERIALI IN TEHNOLOGIJE, 2024, 58 (02): : 121 - 127
  • [26] Effect of Welding Parameters on Mechanical Properties of Cold Metal Transfer Welded Thin AISI 304 Stainless-Steel Sheets
    Jayanta Ghosh Roy
    N. Yuvaraj
    Transactions of the Indian Institute of Metals, 2021, 74 : 2397 - 2408
  • [27] Effect of Welding Parameters on Mechanical Properties of Cold Metal Transfer Welded Thin AISI 304 Stainless-Steel Sheets
    Roy, Jayanta Ghosh
    Yuvaraj, N.
    Vipin
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2021, 74 (09) : 2397 - 2408
  • [28] Effect of Different Lap Angles on Corrosion Resistance of SUS304 Stainless Steel Joints Welded by TIG Welding
    Wang, Jing
    Huo, Yushuang
    INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2024, 25 (12) : 2563 - 2571
  • [29] Effect of resistance spot welding parameters on the austenitic stainless steel 304 grade by using 23 factorial design
    Peasura, Prachya
    OPTICAL, ELECTRONIC MATERIALS AND APPLICATIONS, PTS 1-2, 2011, 216 : 666 - 670
  • [30] Mechanical Properties and Microstructure of Resistance Spot Welded Joints of AISI 409M Ferritic Stainless Steel
    Subrammanian, A.
    Jabaraj, D. B.
    Raja, V. K. Bupesh
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2016, 69 (03) : 767 - 774
12345