Mixed-potential-type NO2 sensor using stabilized zirconia and Cr2O3-WO3 nanocomposites

被引：63

作者：

Diao, Quan ^{[1
]}

Yin, Chengguo ^{[1
]}

Liu, Yingwei ^{[1
]}

Li, Jianguo ^{[1
]}

Gong, Xun ^{[2
]}

Liang, Xishuang ^{[1
]}

Yang, Shiqi ^{[1
]}

Chen, Hong ^{[2
]}

Lu, Geyu ^{[1
]}

机构：

[1] Jilin Univ, Coll Elect Sci & Engn, State Key Lab Integrated Optoelect, Changchun 130012, Peoples R China

[2] Jilin Univ, Dept Control Sci & Technol, Changchun 130012, Peoples R China

来源：

SENSORS AND ACTUATORS B-CHEMICAL | 2013年 / 180卷

关键词：

NO2; sensor; YSZ; Cr2WO6; Mixed potential; NIO SENSING-ELECTRODE; SOLID-ELECTROLYTE; SENSITIVITY; BEHAVIOR; WO3;

D O I：

10.1016/j.snb.2012.07.033

中图分类号：

O65 [分析化学];

学科分类号：

070302 ; 081704 ;

摘要：

A series of mixed W/Cr oxides with different ratio of W and Cr (1:6, 1:2 and 3:2) have been prepared by using polymeric precursor method. By comparing their sensitivities to 20-300 ppm NO2, it was found that the sensor using oxide with 3:2 W/Cr gave the largest response value. For 3:2 W/Cr oxide, the effect of the sintering temperature on the electrode microstructure was also investigated. As a result, the device sintered at 1000 degrees C showed the best performance. The response value to 100 ppm NO2 is 51.6 mV, the response time is within 20s and the sensing device also shows an excellent selectivity against other coexisting gases. The characteristics of SEM and TEM revealed that the special microstructure of oxide electrode formed by sintering plays a significant role in better sensing performance. (C) 2012 Elsevier B.V. All rights reserved.

引用

页码：90 / 95

页数：6

共 21 条

[1] Mixed potential sensors using lanthanum manganate and terbium yttrium zirconium oxide electrodes [J].

Brosha, EL ;

Mukundan, R ;

Brown, DR ;

Garzon, FH .

SENSORS AND ACTUATORS B-CHEMICAL, 2002, 87 (01) :47-57

[2] Combustion control and sensors: a review [J].

Docquier, N ;

Candel, S .

PROGRESS IN ENERGY AND COMBUSTION SCIENCE, 2002, 28 (02) :107-150

[3] Performances of planar NO2 sensor using stabilized zirconia and NiO sensing electrode at high temperature [J].

Elumalai, P ;

Miura, N .

SOLID STATE IONICS, 2005, 176 (31-34) :2517-2522

[4] Sensing characteristics of YSZ-based mixed-potential-type planar NOx sensors using NiO sensing electrodes sintered at different temperatures [J].

Elumalai, P ;

Wang, J ;

Zhuiykov, S ;

Terada, D ;

Hasei, M ;

Miura, N .

JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2005, 152 (07) :H95-H101

[5] Dependence of NO2 sensitivity on thickness of oxide-sensing electrodes for mixed-potential-type sensor using stabilized zirconia [J].

Elumalai, Perumal ;

Plashnitsa, Vladimir V. ;

Ueda, Taro ;

Hasei, Masaharu ;

Miura, Norio .

IONICS, 2006, 12 (06) :331-337

[6] Materials for high temperature electrochemical NOx gas sensors [J].

Fergus, Jeffrey W. .

SENSORS AND ACTUATORS B-CHEMICAL, 2007, 121 (02) :652-663

[7] Improvement of the NOx selectivity for a planar YSZ sensor [J].

Gao, Jing ;

Viricelle, Jean-Paul ;

Pijolat, Christophe ;

Breuil, Philippe ;

Vernoux, Philippe ;

Boreave, Antoinette ;

Giroir-Fendler, Anne .

SENSORS AND ACTUATORS B-CHEMICAL, 2011, 154 (02) :106-110

[8] Electrochemical solid electrolyte gas sensors -: Hydrocarbon and NOx analysis in exhaust gases [J].

Guth, U ;

Zosel, J .

IONICS, 2004, 10 (5-6) :366-377

[9] Electrochemical oxygen pump using CeO2-based solid electrolyte for NOx detection independent of O-2 concentration [J].

Hibino, T ;

Ushiki, K ;

Kuwahara, Y .

SOLID STATE IONICS, 1997, 93 (3-4) :309-314

[10] Mixed-potential-type zirconia-based NO2 sensor with high-performance three-phase boundary [J].

Liang, Xishuang ;

Yang, Shiqi ;

Li, Jianguo ;

Zhang, Han ;

Diao, Quan ;

Zhao, Wan ;

Lu, Geyu .

SENSORS AND ACTUATORS B-CHEMICAL, 2011, 158 (01) :1-8

← 1 2 3 →