Preparation of activated carbon from dried pods of Prosopis cineraria with zinc chloride activation for the removal of phenol

被引:39
作者
Nath, Kaushik [1 ]
Panchani, Suresh [1 ]
Bhakhar, M. S. [1 ]
Chatrola, Sandip [1 ]
机构
[1] GH Patel Coll Engn & Technol, Dept Chem Engn, Vallabh Vidyanagar 388120, Gujarat, India
关键词
Phenol; Adsorption; Activated carbon; Bioregeneration; Isotherm; AQUEOUS-SOLUTIONS; WASTE-WATER; ADSORPTION; HUSK; 2,4-DICHLOROPHENOL; REGENERATION; EQUILIBRIUM; ADSORBENTS; COPPER(II); KINETICS;
D O I
10.1007/s11356-012-1325-y
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
Utilization of agrowaste materials for the production of activated carbon, as an excellent adsorbent with large surface area, is well established industrially, for dephenolation of wastewater. In the present work, dried pods of Prosopis cineraria-a novel and low-cost agrowaste material-were used to prepare activated carbons by zinc chloride activation. Batch adsorption experiments were carried out to study the effects of various physicochemical parameters such as initial phenol concentration, adsorbent dose, initial solution pH, and temperature. Pseudo-first-order second-order and diffusion kinetic models were used to identify the possible mechanisms of such adsorption process. The Langmuir and Freundlich equations were used to analyze the adsorption equilibrium. Maximum removal efficiency of 86 % was obtained with 25 mg L-1 of initial phenol concentration. The favorable pH for maximum phenol adsorption was 4.0. Freundlich equation represented the adsorption equilibrium data more ideally than the Langmuir. The maximum adsorption capacity obtained was 78.32 mg g(-1) at a temperature of 30 A degrees C and 25 mg L-1 initial phenol concentration. The adsorption was spontaneous and endothermic. The pseudo-second-order model, an indication of chemisorption mechanism, fitted the experimental data better than the pseudo-first-order Lagergren model. Regeneration of spent activated carbon was carried out using Pseudomonas putida MTCC 2252 as the phenol-degrading microorganism. Maximum regeneration up to 57.5 % was recorded, when loaded phenol concentration was 25 mg L-1. The data obtained in this study would be useful in designing and fabricating an efficient treatment plant for phenol-rich effluents.
引用
收藏
页码:4030 / 4045
页数:16
相关论文
共 46 条
  • [2] A comparative adsorption/biosorption study of mono-chlorinated phenols onto various sorbents
    Aksu, Z
    Yener, J
    [J]. WASTE MANAGEMENT, 2001, 21 (08) : 695 - 702
  • [3] Bioregeneration of activated carbon:: A review
    Aktas, Ozgur
    Cecen, Ferhan
    [J]. INTERNATIONAL BIODETERIORATION & BIODEGRADATION, 2007, 59 (04) : 257 - 272
  • [4] Adsorption of phenol using different types of activated bentonites
    Al-Asheh, S
    Banat, F
    Abu-Aitah, L
    [J]. SEPARATION AND PURIFICATION TECHNOLOGY, 2003, 33 (01) : 1 - 10
  • [5] The factors affecting the performance of activated carbon prepared from oil palm empty fruit bunches for adsorption of phenol
    Alam, Md Zahangir
    Ameem, Emad S.
    Muyibi, Suleyman A.
    Kabbashi, Nassereldeen A.
    [J]. CHEMICAL ENGINEERING JOURNAL, 2009, 155 (1-2) : 191 - 198
  • [6] Adsorption kinetics and performance of packed bed adsorber for phenol removal using activated carbon from dates' stones
    Alhamed, Yahia A.
    [J]. JOURNAL OF HAZARDOUS MATERIALS, 2009, 170 (2-3) : 763 - 770
  • [7] APHA, 1989, Standard methods for the examination of water and wastewater, V17th ed.
  • [8] Utilization of raw and activated date pits for the removal of phenol from aqueous solutions
    Banat, F
    Al-Asheh, S
    Al-Makhadmeh, L
    [J]. CHEMICAL ENGINEERING & TECHNOLOGY, 2004, 27 (01) : 80 - 86
  • [9] Adsorption of phenol by bentonite
    Banat, FA
    Al-Bashir, B
    Al-Asheh, S
    Hayajneh, O
    [J]. ENVIRONMENTAL POLLUTION, 2000, 107 (03) : 391 - 398
  • [10] Technologies for the removal of phenol from fluid streams: A short review of recent developments
    Busca, Guido
    Berardinelli, Silvia
    Resini, Carlo
    Arrighi, Laura
    [J]. JOURNAL OF HAZARDOUS MATERIALS, 2008, 160 (2-3) : 265 - 288