Experimental investigation of the optimization of nozzles under an injection pipe in a pulse-jet cartridge filter

被引:22
作者
Li, Shihang [1 ,2 ]
Xin, Jie [1 ,2 ]
Xie, Biao [1 ,2 ]
Jin, Hao [1 ,2 ]
Hu, Shuda [1 ,2 ]
Song, Shuli [1 ,2 ]
Zhou, Shimeng [1 ,2 ]
Zhou, Fubao [1 ,2 ,3 ]
机构
[1] China Univ Min & Technol, Jiangsu Key Lab Fire Safety Urban Underground Spa, Xuzhou 221116, Jiangsu, Peoples R China
[2] China Univ Min & Technol, Sch Safety Engn, Xuzhou 221116, Jiangsu, Peoples R China
[3] China Univ Min & Technol, State Key Lab Coal Resources & Mine Safety, Xuzhou 221116, Jiangsu, Peoples R China
关键词
Pulse-jet; Cartridge filter; Injection pipe; Nozzle diameter; Filtration performance; HUMIDITY; SURFACE; TEMPERATURE; PERFORMANCE; COLLECTOR; PRESSURE; SCALE; DROP; GAS;
D O I
10.1016/j.powtec.2019.01.006
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
Pulse jet cleaning is often used with cartridge filters. However, pulse jet cleaning is non-uniform between filter cartridges under the same injection pipe. In this study, a pulse-jet cartridge filter was designed. The static pressures on the inner wall of the filter cartridges, the transient pressures below the nozzles, the pressure drops in the filter cartridges, the dust emission concentrations, and the filtration cycle length were investigated. In addition, a quality index was used to evaluate the filtration performance of the pulse jet cartridge filter. The nozzle diameters were optimized using the optimization ratio of 0.76, 0.87, 0.95, 1.11, and 1.31, respectively. After optimization, the nozzle diameters were 11.5, 10.5, 10.0, 9.5, and 9.0 mm along the airflow direction of the injection pipe. At a result, the uniformity of the composite pressures on the inner wall of the filter cartridges and the transient pressures below the nozzles were all significantly improved. Nozzle diameter optimization decreased the filtration pressure drop, prolonged the filtration cycle, and improved the dust collection efficiency. Furthermore, the quality index increased, and the filtration performance of the pulse jet cartridge filter was improved after optimization. (C) 2019 Published by Elsevier B.V.
引用
收藏
页码:363 / 369
页数:7
相关论文
共 50 条
[21]   Measurement of effective filtration area of pleated bag filter for pulse-jet cleaning [J].
Kim, Jin Sik ;
Lee, Myong-Hwa .
POWDER TECHNOLOGY, 2019, 343 :662-670
[22]   Origin and mechanisms of dust emission from pulse-jet cleaned filter media [J].
Binnig, J. ;
Meyer, J. ;
Kasper, G. .
POWDER TECHNOLOGY, 2009, 189 (01) :108-114
[23]   Influence of operating parameters on cake formation in pilot scale pulse-jet bag filter [J].
Saleem, Mahmood ;
Krammer, Gernot ;
Khan, Rafi Ullah ;
Tahir, M. Suleman .
POWDER TECHNOLOGY, 2012, 224 :28-35
[24]   Experimental investigation of particle deposition in filter media during filtration cycles with regeneration by pulse jet cleaning [J].
Rodrigues Cirqueira, Samirys Sara ;
Tanabe, Eduardo Hiromitsu ;
Aguiar, Monica Lopes .
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION, 2019, 127 :288-298
[25]   Experimental study of pleated fabric cartridges in a pulse-jet cleaned dust collector [J].
Lo, Li-Ming ;
Chen, Da-Ren ;
Pui, David Y. H. .
POWDER TECHNOLOGY, 2010, 197 (03) :141-149
[26]   Experimental optimization for cleaning parameters and field application of cartridge filter in bulk grain loading [J].
Jin, Hao ;
Hu, Shuda ;
Xie, Biao ;
Yan, Yunxiu ;
Yang, Miao ;
Zhou, Fubao .
POWDER TECHNOLOGY, 2021, 378 :421-429
[27]   Consequences of high transitory airflows generated by segmented pulse-jet cleaning of dust collector filter bags [J].
Simon, Xavier ;
Bemer, Denis ;
Chazelet, Sandrine ;
Thomas, Dominique ;
Regnier, Roland .
POWDER TECHNOLOGY, 2010, 201 (01) :37-48
[28]   Characteristics of pressure drop during the pulse-jet cleaning of a ceramic filter for high temperature and high pressure [J].
Jin-Hyoung Kim ;
Young-Chul Kim ;
Joo-Hong Choi .
Korean Journal of Chemical Engineering, 2016, 33 :726-734
[29]   Effect of pre-cladding dust layer on filtration and pulse-jet cleaning performance of filter media [J].
Cheng, Hui ;
Li, Shihang ;
Li, Gengjun ;
Peng, Gangcheng ;
Wei, Yingchao ;
Jin, Hao ;
Hu, Shuda ;
Gui, Changgeng ;
Zhou, Fubao .
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION, 2024, 183 :1-10
[30]   A novel pulse-jet cleaning method to effectively extend the lifetime of pleated filter and reduce dust emission [J].
Yu, Zhenhui ;
Muraoka, Yuki ;
Furumoto, Kazuki ;
Fukasawa, Tomonori ;
Ishigami, Toru ;
Liu, Jingxian ;
Fukui, Kunihiro .
ADVANCED POWDER TECHNOLOGY, 2024, 35 (05)