Introduction of nanoclay-modified fiber metal laminates

被引：37

作者：

Zakaria, Afshin Zamani ^{[1
]}

Shelesh-nezhad, Karim ^{[1
]}

机构：

[1] Univ Tabriz, Dept Mech Engn, Tabriz, Iran

来源：

ENGINEERING FRACTURE MECHANICS | 2017年 / 186卷

关键词：

Fiber metal laminate; Nanoclay reinforcement; Interfacial fracture toughness; Crack blunting; MECHANICAL-PROPERTIES; SURFACE TREATMENTS; BEHAVIOR; NANOCOMPOSITES; EXFOLIATION; IMPROVEMENT; PARTICLES; ADHESION;

D O I：

10.1016/j.engfracmech.2017.10.023

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

In this paper we aim to introduce benefits in modification of epoxy resin of fiber metal laminates (FMLs) with mineral nanoclay platelets. FMLs with carbon fibers and aluminum metal were attached by epoxy resin modified with various amounts of nanoclay. Elastic properties and interfacial toughness of fabricated FMLs were obtained for different percentages of nanoclay incorporation. Results reveal that the interfacial fracture toughness of the FML increases approximately double-fold by 0.5 wt% incorporation of nanoclay. This is attributed to the exfoliation of nanoclay (suggested by XRD) and toughening of the resin by crack blunting mechanism (suggested by SEM). (C) 2017 Elsevier Ltd. All rights reserved.

引用

页码：436 / 448

页数：13

共 30 条

[1] Investigation of curing effects on distortion of fibre metal laminates
Abouhamzeh, M.
Sinke, J.
Benedictus, R.
[J]. COMPOSITE STRUCTURES, 2015, 122 : 546 - 552
[2] [Anonymous], 2014, D3039D3039M ASTM
[3] Experimental and numerical characterization of delamination buckling behavior of a new class of GNP-reinforced 3D fiber-metal laminates
Asaee, Zohreh
Mohamed, Mbarka
Soumik, Sadman
Taheri, Farid
[J]. THIN-WALLED STRUCTURES, 2017, 112 : 208 - 216
[4] Bienias J, 2017, ENG FRACT MECH
[5] Synthesis of disordered and highly exfoliated epoxy/clay nanocomposites using organoclay with catalytic function via acetone-clay slurry method
Chen, B
Liu, J
Chen, HB
Wu, JS
[J]. CHEMISTRY OF MATERIALS, 2004, 16 (24) : 4864 - +
[6] Multi-layer polymer metal laminates for the fire protection of lightweight structures
Christke, S.
Gibson, A. G.
Grigoriou, K.
Mouritz, A. P.
[J]. MATERIALS & DESIGN, 2016, 97 : 349 - 356
[7] AN ANALYTICAL CRACK-TIP ELEMENT FOR LAYERED ELASTIC STRUCTURES
DAVIDSON, BD
HU, HR
SCHAPERY, RA
[J]. JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, 1995, 62 (02): : 294 - 305
[8] Effect of nanoclay addition on the fiber/matrix adhesion in epoxy/glass composites
Dorigato, Andrea
Morandi, Stefano
Pegoretti, Alessandro
[J]. JOURNAL OF COMPOSITE MATERIALS, 2012, 46 (12) : 1439 - 1451
[9] Hennessey J.M., 1965, Experimental methods for determining shear modulus of fiber reinforced composite materials
[10] Hillerborg A., 1976, Cem. Concr. Res, V6, P773, DOI [DOI 10.1016/0008-8846(76)90007-7, 10.1016/0008-8846(76)90007-7]

← 1 2 3 →