Surface Profile Observation of PTFE Radial Bearings under Rolling-Contact-Fatigue in Water

被引：1

作者：

Oyama, Shunsuke ^{[1
]}

Kida, Katsuyuki ^{[1
]}

Santos, Edson Costa ^{[1
]}

Koike, Hitonobu ^{[1
]}

Kashima, Yuji ^{[2
]}

机构：

[1] Kyushu Univ, Dept Mech Eng, Nishi Ku, 744 Motooka, Fukuoka 812, Japan

[2] Kashima Plast Bearings Corp, Nishiyodogawa Ku, Osaka, Japan

来源：

MECHATRONICS AND COMPUTATIONAL MECHANICS | 2013年 / 307卷

关键词：

Tribology; Rolling Contact fatigue; Polymer Bearing; PTFE; Wear; POLYMER BEARINGS; ROTATION SPEED; PEEK BEARINGS; LOAD; RACE;

D O I：

10.4028/www.scientific.net/AMM.307.337

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Groove shape effect on wear behavior in PTFE radial bearings under rolling contact fatigue (RCF) was investigated. RCF tests in water-lubricated conditions were carried out at different loads and rotation speeds. The groove surfaces after testing were observed by using a laser confocal microscope and a two-dimensional shape measurement sensor. It was found that PTFE bearings under RCF generate wear debris, however no cracking or flaking failure could be observed. It is concluded that groove deformation depend on load rather than rotation speed. The biggest changes in groove profiles occurred when tested at loads close to 400N.

引用

页码：337 / +

页数：2

共 50 条

[21] Flaking failures originating from microholes of bearings under rolling contact fatigue
Kida, K.
Yoshidome, K.
Yamakawa, K.
Harada, H.
Oguma, N.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2006, 29 (12) : 1021 - 1030
[22] ROLLING-CONTACT-FATIGUE WEAR CHARACTERISTICS OF DIAMOND-LIKE HYDROCARBON COATINGS ON STEELS
WEI, RH
WILBUR, PJ
LISTON, MJ
LUX, G
WEAR, 1993, 162 (pt A) : 558 - 568
[23] Observation of wear in PEEK race - PTFE retainer hybrid polymer bearings under dry contact
Mizobe, Koshiro
Santos, Edson Costa
Honda, Takashi
Koike, Hitonobu
Kida, Katsuyuki
Kashima, Yuji
ADVANCED MATERIALS AND ENGINEERING MATERIALS, PTS 1 AND 2, 2012, 457-458 : 557 - +
[24] Observation of fracture behavior of 3-D printed specimens under rolling contact fatigue in water
Mizobe, Koshiro
Inagaki, Masahiro
Kida, Katsuyuki
INTERNATIONAL CONFERENCE ON COMPOSITE MATERIAL, POLYMER SCIENCE AND ENGINEERING (CMPSE2017), 2017, 130
[25] Mathematical simulation and analysis of rolling contact fatigue damage in rolling bearings
Korolev, Albert V.
Korolev, Andrey A.
Krehel', Radoslav
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 89 (1-4): : 661 - 664
[26] Mathematical simulation and analysis of rolling contact fatigue damage in rolling bearings
Albert V. Korolev
Andrey A. Korolev
Radoslav Kreheľ
The International Journal of Advanced Manufacturing Technology, 2017, 89 : 661 - 664
[27] Rolling Contact Fatigue in Bearings: Phenomenology and Modelling Techniques
Rivera-Diaz-del-Castillo, P. E. J.
BEARING STEEL TECHNOLOGIES, VOL 9: ADVANCES IN ROLLING CONTACT FATIGUE STRENGTH TESTING AND RELATED SUBSTITUTE TECHNOLOGIES, 2012, 1548 : 355 - 381
[28] Rolling contact fatigue in refurbished case carburized bearings
Paulson, Neil R.
Golmohammadi, Zamzam
Walvekar, Aditya A.
Sadeghi, Farshid
Mistry, Kuldeep
TRIBOLOGY INTERNATIONAL, 2017, 115 : 348 - 364
[29] Further understanding of rolling contact fatigue in rolling element bearings - A review
El Laithy, Mostafa
Wang, Ling
Harvey, Terry J.
Vierneusel, Bernd
Correns, Martin
Blass, Toni
TRIBOLOGY INTERNATIONAL, 2019, 140
[30] Rolling Contact Fatigue and White Etching Cracks of Bearings
Holweger, Walter Martin
Gegner, Juergen
LUBRICANTS, 2023, 11 (06)

← 1 2 3 4 5 →