Study of channel angle influence on material flow and strain inhomogeneity in equal channel angular pressing using 3D finite element simulation

被引：91

作者：

Basavaraj, V. Patil ^{[1
]}

Chakkingal, Uday ^{[1
]}

Kumar, T. S. Prasanna ^{[1
]}

机构：

[1] Indian Inst Technol, Dept Met & Mat Engn, Madras 600036, Tamil Nadu, India

来源：

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2009年 / 209卷 / 01期

关键词：

Equal channel angular pressing (ECAP); Finite element analysis (FEA); Strain inhomogeneity; Equivalent plastic strain; Aluminium Alloy AA6101; ABAQUS; DEFORMATION-BEHAVIOR; PLASTIC-DEFORMATION; EXTRUSION;

D O I：

10.1016/j.jmatprotec.2008.01.031

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Equal channel angular pressing (ECAP) is currently being widely investigated because of its potential to produce ultra-fine grained microstructures in metals and alloys. A sound knowledge of the plastic deformation and strain distribution is necessary for understanding the relationships between strain inhomogeneity and geometry of die. Considerable research has been reported on finite element analysis of this process, assuming 2D plane strain condition. The 2D models are not suitable due to the component geometry, especially for workpiece with cylindrical cross-section. in the present work 3D simulation of ECAP process was carried out, using ABAQUS/Standard software, for different channel angles for a strain hardening aluminium alloy (AA6101). Strain inhomogeneity is presented and discussed for all cases. Pattern of variation of strain along some selected radial lines in steady-state zone is presented. (C) 2008 Elsevier B.V. All rights reserved.

引用

页码：89 / 95

页数：7

共 20 条

[11]

RAGHAVAN S, 2001, SCRIPTA MATER, V44, P91, DOI DOI 10.1016/S1359-6462(00)00546-7

[12] Equal channel angular extrusion: from macromechanics to structure formation [J].

Segal, VM .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1999, 271 (1-2) :322-333

[13] MATERIALS PROCESSING BY SIMPLE SHEAR [J].

SEGAL, VM .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1995, 197 (02) :157-164

[14]

SEGAL VM, 1997, Patent No. 575892

[15]

SON IH, 2006, J MATER PROCESS TECH, V171, P480, DOI DOI 10.1016/J.JMATPROTEC.2005.11.001

[16] 3D finite element analysis on strain uniformity during ECAP process [J].

Su, C. W. ;

Lu, L. ;

Lai, M. O. .

MATERIALS SCIENCE AND TECHNOLOGY, 2007, 23 (06) :727-735

[17] Finite element analysis of material flow in equal channel angular pressing [J].

Suh, JY ;

Kim, HS ;

Park, JW ;

Chang, JY .

SCRIPTA MATERIALIA, 2001, 44 (04) :677-681

[18] The simulation of deformation distribution during ECAP using 3D finite element method [J].

Suo, Tao ;

Li, Yulong ;

Guo, Yazhou ;

Liu, Yuanyong .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 432 (1-2) :269-274

[19] Origin of inhomogenous behavior during equal channel angular pressing [J].

Wei, W ;

Nagasekhar, AV ;

Chen, G ;

Tick-Hon, Y ;

Wei, KX .

SCRIPTA MATERIALIA, 2006, 54 (11) :1865-1869

[20] Die design for homogeneous plastic deformation during equal channel angular pressing [J].

Yoon, S. C. ;

Quang, P. ;

Hong, S. I. ;

Kim, H. S. .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 187 :46-50

← 1 2 →