Study of channel angle influence on material flow and strain inhomogeneity in equal channel angular pressing using 3D finite element simulation

被引：91

作者：

Basavaraj, V. Patil ^{[1
]}

Chakkingal, Uday ^{[1
]}

Kumar, T. S. Prasanna ^{[1
]}

机构：

[1] Indian Inst Technol, Dept Met & Mat Engn, Madras 600036, Tamil Nadu, India

来源：

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2009年 / 209卷 / 01期

关键词：

Equal channel angular pressing (ECAP); Finite element analysis (FEA); Strain inhomogeneity; Equivalent plastic strain; Aluminium Alloy AA6101; ABAQUS; DEFORMATION-BEHAVIOR; PLASTIC-DEFORMATION; EXTRUSION;

D O I：

10.1016/j.jmatprotec.2008.01.031

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Equal channel angular pressing (ECAP) is currently being widely investigated because of its potential to produce ultra-fine grained microstructures in metals and alloys. A sound knowledge of the plastic deformation and strain distribution is necessary for understanding the relationships between strain inhomogeneity and geometry of die. Considerable research has been reported on finite element analysis of this process, assuming 2D plane strain condition. The 2D models are not suitable due to the component geometry, especially for workpiece with cylindrical cross-section. in the present work 3D simulation of ECAP process was carried out, using ABAQUS/Standard software, for different channel angles for a strain hardening aluminium alloy (AA6101). Strain inhomogeneity is presented and discussed for all cases. Pattern of variation of strain along some selected radial lines in steady-state zone is presented. (C) 2008 Elsevier B.V. All rights reserved.

引用

页码：89 / 95

页数：7

共 20 条

[1]

BASAVARAJ VP, 2006, 60 ANN TECHN M IND I, P17

[2] Principle of equal-channel angular pressing for the processing of ultra-fine grained materials [J].

Iwahashi, Y ;

Wang, JT ;

Horita, Z ;

Nemoto, M ;

Langdon, TG .

SCRIPTA MATERIALIA, 1996, 35 (02) :143-146

[3] Finite element analysis of equal channel angular pressing of strain rate sensitive metals [J].

Kim, HS ;

Seo, MH ;

Hong, SI .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 130 :497-503

[4] Plastic deformation analysis of metals during equal channel angular pressing [J].

Kim, HS ;

Seo, MH ;

Hong, SI .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 113 (1-3) :622-626

[5] Analysis of deformation behavior in 3D during equal channel angular extrusion [J].

Kim, J. K. ;

Kim, W. J. .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 176 (1-3) :260-267

[6]

LANG Y, 2003, J MATER PROCESS TECH, V140, P583

[7] Finite element analysis for deformation behavior of an aluminum alloy composite containing SiC particles and porosities during ECAP [J].

Lee, SC ;

Ha, SY ;

Kim, KT ;

Hwang, SM ;

Huh, LM ;

Chung, HS .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 371 (1-2) :306-312

[8] Finite element analysis of the plastic deformation zone and working load in equal channel angular extrusion [J].

Li, S ;

Bourke, MAM ;

Beyerlein, IJ ;

Alexander, DJ ;

Clausen, B .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 382 (1-2) :217-236

[9]

NAGARAJAN D, 2005, THESIS INDIAN I TECH, P47

[10] Optimal tool angles for equal channel angular extrusion of strain hardening materials by finite element analysis [J].

Nagasekhar, AV ;

Tick-Hon, Y .

COMPUTATIONAL MATERIALS SCIENCE, 2004, 30 (3-4) :489-495

← 1 2 →