Development and characterization of CoAl-Al2O3 intermetallic matrix nanocomposite

被引：5
|
作者：
Hosseini, S. N. [1 ]
Karimzadeh, F. [1 ]
Enayati, M. H. [1 ]
机构：
[1] Isfahan Univ Technol, Dept Mat Engn, Esfahan 8415683111, Iran
来源：
MATERIALS CHEMISTRY AND PHYSICS | 2012年 / 136卷 / 2-3期
关键词：
Composite materials; Intermetallic compounds; Nanostructures; Annealing; MECHANICAL-PROPERTIES; B2COAL;
D O I：
10.1016/j.matchemphys.2012.06.030
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
CoAl-Al2O3 nanocomposite was synthesized by mechanical alloying (MA) of Co3O4-Al powder mixture. The reduction of Co3O4 by Al and CoAl formation occurred simultaneously in a combustion mode. The resulting CoAl phase had an ordered structure with a long range order (LRO) parameter of 0.99 which was reduced to a constant value of 0.83 by further milling. Lattice parameter measurements showed that disordering of CoAl was caused by triple defect mechanism. Three kinds of structural evolutions namely, reordering and disordering, strain relaxation and grain growth were observed during subsequent isothermal annealing at different temperatures. Isothermal annealing at temperatures below 773 K resulted in a fully ordered CoAl while at higher temperatures disordering occurred again. Decrease of LRO parameter at higher temperatures was interpreted to be due to the thermal activation, which induced triple defects. Grain growth rate of constituent phases was observed to reduce at higher temperatures. (c) 2012 Elsevier B.V. All rights reserved.
引用
收藏
页码：341 / 346
页数：6
相关论文
共 50 条
  • [41] Effect of multiwalled carbon nanotubes (MWCNTs) distribution on physiomechancal characteristics of alumina (Al2O3) matrix nanocomposite
    Toor, Zaigham Saeed
    Shifa, Madni
    DIAMOND AND RELATED MATERIALS, 2023, 136
  • [42] On structure and mechanical properties of ultrasonically cast Al-2% Al2O3 nanocomposite
    Mula, S.
    Padhi, P.
    Panigrahi, S. C.
    Pabi, S. K.
    Ghosh, S.
    MATERIALS RESEARCH BULLETIN, 2009, 44 (05) : 1154 - 1160
  • [43] Study the effect of mechanical alloying parameters on synthesis of Cr2Nb-Al2O3 nanocomposite
    Shayesteh, Payam
    Mirdamadi, Shamseddin
    Razavi, Hossein
    MATERIALS RESEARCH BULLETIN, 2014, 49 : 50 - 57
  • [44] Nanoquasicrystalline Al-based matrix/γ-Al2O3 nanocomposites
    Galano, M.
    Marsh, A.
    Audebert, F.
    Xu, W.
    Ramundo, M.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 643 : S99 - S106
  • [45] Determining the effect of flake matrix size and Al2O3 content on microstructure and mechanical properties of Al2O3 nanoparticle reinforced Al matrix composites
    Varol, T.
    Canakci, A.
    Ozkaya, S.
    Erdemir, F.
    PARTICULATE SCIENCE AND TECHNOLOGY, 2018, 36 (03) : 312 - 323
  • [46] Characterization of microstructure and properties of Al-Al3Zr-Al2O3 composite
    Mandal, Anup
    Das, Karabi
    Das, Siddhartha
    BULLETIN OF MATERIALS SCIENCE, 2016, 39 (04) : 913 - 924
  • [47] SEM and TEM characterization of NiAl2O4 spinel phase in Al2O3 matrix Ni composite
    Konopka, Katarzyna
    Litynska-Dobrzynska, Lidia
    Dutkiewicz, Jan
    ELECTRON MICROSCOPY XIV, 2012, 186 : 222 - +
  • [48] Microstructure and mechanical properties of NdAlO3/Al2O3 nanocomposite
    Jin, XH
    Gao, L
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 354 (1-2): : 326 - 330
  • [49] Mechanical behavior and characterization of Al7075 reinforced with Al2O3 and TiC Hybrid metal matrix composite
    Radha, A.
    Prabu, D. Antony
    Jayakumar, KS.
    Sankaralingam, T.
    Selvam, B.
    Balaharsha, S.
    MATERIALS TODAY-PROCEEDINGS, 2022, 62 : 876 - 881
  • [50] Effects of Al2O3 Particles on Corrosion Behavior and Microstructure of Al-Al2O3 Composites and Texture of Aluminum Matrix
    Dehrib, Sabrina
    Zazi, Nacer
    Durmus, Hulya
    PROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES, 2024, 60 (04) : 685 - 695
12345