Improvement of anode-supported solid oxide fuel cells

被引：38
|
作者：
Wang, Z. R. [1 ]
Qian, J. Q. [1 ]
Wang, S. R. [1 ]
Cao, J. D. [1 ]
Wen, T. L. [1 ]
机构：
[1] Chinese Acad Sci, Shanghai Inst Ceram, Shanghai 200050, Peoples R China
来源：
SOLID STATE IONICS | 2008年 / 179卷 / 27-32期
关键词：
solid oxide fuel cell (SOFC); anode; tape casting; impedance spectra;
D O I：
10.1016/j.ssi.2008.03.022
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
Anode-supported electrolyte composite membranes were prepared by a multilayer tape casting and co-sintering procedure. Nickel/yttria-stabilized zirconia (Ni/YSZ), nickel/scandia-stabilized zirconia (Ni/ScSZ) cermets, ScSZ, and Ce0.9Gd0.1O1.9 (CGO) were used as materials of anode substrate, anode functional layer, electrolyte and interlayer. After tape casting and dryness, the green tapes were co-sintered at 1350, 1400, and 1450 degrees C for 4 h in air. Then the LSCF-CGO composite cathode was deposited on the CGO surface by screen-printing and sintered at 1100 degrees C for 3 h. The performance of the anode-supported planar single SOFC was investigated in detail. In order to measure the AC impedance spectra, the symmetrical anode-supported cell design was used and also prepared by tape casting and co-sintering techniques. (C) 2008 Elsevier B.V. All rights reserved.
引用
收藏
页码：1593 / 1596
页数：4
相关论文
共 50 条
  • [31] STRATEGIES TO IMPROVE THE RELIABILITY OF ANODE-SUPPORTED SOLID OXIDE FUEL CELLS WITH RESPECT TO ANODE REOXIDATION
    Ettler, Manuel
    Menzler, Norbert H.
    Mauer, Georg
    Tietz, Frank
    Buchkremer, Hans Peter
    Stoever, Detlev
    ADVANCES IN MATERIALS SCIENCE FOR ENVIRONMENTAL AND NUCLEAR TECHNOLOGY II, 2011, 227 : 101 - 110
  • [32] Fabrication and properties of anode-supported solid oxide fuel cell
    Han, Min-Fang
    Yin, Hui-Yan
    Miao, Wen-Ting
    Zhou, Su
    SOLID STATE IONICS, 2008, 179 (27-32) : 1545 - 1548
  • [33] RedOx study of anode-supported solid oxide fuel cell
    Faes, Antonin
    Nakajo, Arata
    Hessler-Wyser, Aiecha
    Dubois, David
    Brisse, Annabelle
    Modena, Stefano
    Van herle, Jan
    JOURNAL OF POWER SOURCES, 2009, 193 (01) : 55 - 64
  • [34] Mass Transfer Analysis of Metal-Supported and Anode-Supported Solid Oxide Fuel Cells
    Park, Joonguen
    Kim, Sunyoung
    Bae, Joongmyeon
    TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS B, 2010, 34 (03) : 317 - 324
  • [35] Improvement in the Electrochemical Performance of Anode-supported Solid Oxide Fuel Cells by Meso- and Nanoscale Structural Modifications
    Seo, H.
    Kishimoto, M.
    Ding, C.
    Iwai, H.
    Saito, M.
    Yoshida, H.
    FUEL CELLS, 2020, 20 (05) : 570 - 579
  • [36] Operation of anode-supported solid oxide fuel cells on propane-air fuel mixtures
    Zhan, ZL
    Liu, J
    Barnett, SA
    APPLIED CATALYSIS A-GENERAL, 2004, 262 (02) : 255 - 259
  • [37] Dependence of polarization in anode-supported solid oxide fuel cells on various cell parameters
    Zhao, F
    Virkar, AV
    JOURNAL OF POWER SOURCES, 2005, 141 (01) : 79 - 95
  • [38] Effect of the cathode structure on the electrochemical performance of anode-supported solid oxide fuel cells
    Li, Junliang
    wang, Shaorong
    Wang, Zhenrong
    Qian, Jiqin
    Liu, Renzhu
    Wen, Tinglian
    Wen, Zhaoyin
    JOURNAL OF SOLID STATE ELECTROCHEMISTRY, 2010, 14 (04) : 579 - 583
  • [39] Development of LSM/YSZ composite cathode for anode-supported solid oxide fuel cells
    Y.J. Leng
    S.H. Chan
    K.A. Khor
    S.P. Jiang
    Journal of Applied Electrochemistry, 2004, 34 : 409 - 415
  • [40] Novel structured anode-supported solid oxide fuel cells with porous GDC interlayers
    Timurkutluk, Bora
    Dokuyucu, Semiha
    Onbilgin, Sezer
    CERAMICS INTERNATIONAL, 2020, 46 (08) : 11066 - 11074
12345