VIBRATION BASED SUN GEAR DAMAGE DETECTION

被引：0

作者：

Hood, Adrian ^{[1
]}

LaBerge, Kelsen ^{[1
]}

Lewicki, David ^{[2
]}

Pines, Darryll ^{[3
]}

机构：

[1] US Army Res Lab, Aberdeen Proving Ground, MD 21005 USA

[2] NASA, Glenn Res Ctr, Cleveland, OH USA

[3] Univ Maryland, A James Clark Sch Engn, College Pk, MD 20742 USA

来源：

PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2013, VOL 5 | 2014年

关键词：

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Seeded fault experiments were conducted on the planetary stage of an OH-58C helicopter transmission. Two vibration based methods are discussed that isolate the dynamics of the sun gear from that of the planet gears, bearings, input spiral bevel stage, and other components in and around the gearbox. Three damaged sun gears: two spalled and one cracked, serve as the focus of this current work. A non-sequential vibration separation algorithm was developed and the resulting signals analyzed. The second method uses only the time synchronously averaged data but takes advantage of the signal/source mapping required for vibration separation. Both algorithms were successful in identifying the spall damage. Sun gear damage was confirmed by the presence of sun mesh groups. The sun tooth crack condition was inconclusive.

引用

页数：14

共 50 条

[41] Quantitative damage detection for planetary gear sets based on physical models
Zhe Cheng
Niaoqing Hu
Chinese Journal of Mechanical Engineering, 2012, 25 : 190 - 196
[42] Early Detection of Gear Failure by Vibration Analysis
Merzoug, Mustapha
Ait-Sghir, Khalid
Miloudi, Abdelhamid
Dron, Jean Paul
Bolaers, Fabrice
MULTIPHYSICS MODELLING AND SIMULATION FOR SYSTEMS DESIGN AND MONITORING, 2015, 2 : 69 - 79
[43] Demodulation of Gear Vibration Signals for Fault Detection
Chen, Hanxin
Zuo, Ming J.
PROCEEDINGS OF 2009 8TH INTERNATIONAL CONFERENCE ON RELIABILITY, MAINTAINABILITY AND SAFETY, VOLS I AND II: HIGHLY RELIABLE, EASY TO MAINTAIN AND READY TO SUPPORT, 2009, : 826 - +
[44] VIBRATION-BASED DAMAGE DETECTION IN A BEAM STRUCTURE WITH MULTIPLE DAMAGE LOCATIONS
Rucevskis, Sandris
Wesolowski, Miroslaw
Chate, Andris
AVIATION, 2009, 13 (03) : 61 - 71
[45] Damage experiment on a steel plate girder bridge and vibration based damage detection
Kim, C. W.
Goi, Y.
Mimasu, T.
Kawatani, M.
ADVANCES IN ENGINEERING MATERIALS, STRUCTURES AND SYSTEMS: INNOVATIONS, MECHANICS AND APPLICATIONS, 2019, : 2029 - 2034
[46] VIBRATION-BASED DAMAGE DETECTION IN PLATES USING DAMAGE LOCATION VECTORS
Kayed, Mohammed O.
Arafa, Mustafa H.
Megahed, Said M.
PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2011, VOL 7, PTS A AND B, 2012, : 1003 - 1011
[47] Numerical study for evaluation of a vibration based damage index for effective damage detection
Mehboob, S.
Khan, Q. U. Zaman
Ahmad, S.
BULLETIN OF THE POLISH ACADEMY OF SCIENCES-TECHNICAL SCIENCES, 2020, 68 (06) : 1443 - 1456
[48] Gear Checking for the Sun Gear in Planet-Gear Reducer based on Practical Engineering Application
Ma, Shuai
Shi, Yue-jiang
Gao, Yun-kun
Guo, Jin-long
2020 3RD WORLD CONFERENCE ON MECHANICAL ENGINEERING AND INTELLIGENT MANUFACTURING (WCMEIM 2020), 2020, : 575 - 578
[49] VIBRATION BASED VIRTUAL VORTEX GEAR
Miyashiro, Hiroki
Takayama, Toshio
Tsai, Chia-Hung Dylan
Kaneko, Makoto
2018 IEEE MICRO ELECTRO MECHANICAL SYSTEMS (MEMS), 2018, : 1128 - 1129
[50] The influence of gear design parameters on gear tooth damage detection sensitivity
Liu, L
Pines, DJ
JOURNAL OF MECHANICAL DESIGN, 2002, 124 (04) : 794 - 804

← 1 2 3 4 5 →