Stainless Steel Bipolar Plates for PEM Fuel Cell

被引：2
|
作者：
Orozco, G. [1 ]
Correa, F. [2 ]
Arredondo, G. [3 ]
机构：
[1] CIDETEQ, Parque Ind Sanfandila, Pedro Escobedo 767003, Qro, Mexico
[2] IMINOX, San Luis Potosi 78395, Mexico
[3] IN MEC, Parque Ind Bernardo Quintana, El Marques, Mexico
来源：
FUEL CELL SEMINAR 2009 | 2010年 / 26卷 / 01期
关键词：
D O I：
10.1149/1.3428990
中图分类号：
O646 [电化学、电解、磁化学];
学科分类号：
081704 ;
摘要：
The corrosion resistance of several bipolar plate metallic materials candidates was evaluated in the chemical environment encountered in PEM fuel cells. The value of PREN (Pitting Resistance Equivalent Number) was calculated for metallic materials and compared with the corrosion current. PREN is not useful in bipolar plates research. Only SS 316 and Inconel 625 are suitable for use as a flow-field plate on the cathodic side of a PEM fuel cell. Because of its Mo content, Inconel 625 has a higher corrosion resistance. The corrosion resistance of AISI 444 is satisfactory so the material is acceptable for bipolar plate materials. The corrosion resistance of SS ferritic (70% Fe) is higher and cannot been considered as material for bipolar plate materials.
引用
收藏
页码：207 / 214
页数：8
相关论文
共 50 条
  • [41] Flow Distribution Measurements at the Exit of Bipolar Plates in a PEM Fuel Cell Stack
    Klinner, Joachim
    Willert, Christian
    Schneider, Armin
    Mack-Gardner, Andre
    TM-TECHNISCHES MESSEN, 2011, 78 (05) : 246 - 252
  • [42] Contact resistance measurement methods for PEM fuel cell bipolar plates and terminals
    Molmen, Live
    Fast, Lars
    Lundblad, Anders
    Eriksson, Peter
    Leisner, Peter
    JOURNAL OF POWER SOURCES, 2023, 555
  • [43] Flow distribution measurements at the exit of bipolar plates in a PEM fuel cell stack
    Klinner, Joachim
    Willert, Christian
    Schneider, Armin
    Mack-Gardner, André
    Technisches Messen, 2011, 78 (05): : 246 - 252
  • [44] Development and characterization of a miniature PEM fuel cell stack with carbon bipolar plates
    Lin, Po-Chang
    Park, Benjamin Y.
    Madou, Marc J.
    JOURNAL OF POWER SOURCES, 2008, 176 (01) : 207 - 214
  • [45] New materials and procedures to protect metallic PEM fuel cell bipolar plates
    Cunningham, N
    Guay, D
    Dodelet, JP
    Meng, Y
    Hlil, AR
    Hay, AS
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2002, 149 (07) : A905 - A911
  • [46] Corrosion-resistant tantalum coatings for PEM fuel cell bipolar plates
    Gladczuk, L
    Joshi, C
    Patel, A
    Guiheen, J
    Iqbal, Z
    Sosnowski, M
    SOLID STATE IONICS-2002, 2003, 756 : 423 - 428
  • [47] Fe-based amorphous alloys as bipolar plates for PEM fuel cell
    Fleury, E.
    Jayaraj, J.
    Kim, Y. C.
    Seok, H. K.
    Kim, K. Y.
    Kim, K. B.
    JOURNAL OF POWER SOURCES, 2006, 159 (01) : 34 - 37
  • [48] The formation of protective nitride surfaces for PEM fuel cell metallic bipolar plates
    M. P. Brady
    B. Yang
    H. Wang
    J. A. Turner
    K. L. More
    M. Wilson
    F. Garzon
    JOM, 2006, 58 : 50 - 57
  • [49] PVD coated bipolar plates for PEM fuel cells
    Lee, Shuo-Jen
    Huang, Ching-Han
    Chen, Yu-Pang
    Hsu, Chen-Te
    JOURNAL OF FUEL CELL SCIENCE AND TECHNOLOGY, 2005, 2 (04): : 290 - 294
  • [50] Surface modification of stainless steel bipolar plates for PEMFC (proton exchange membrane fuel cell) application
    Yun, Young-Hoon
    Choi, Sung-Churl
    JOURNAL OF ELECTROCERAMICS, 2009, 23 (2-4) : 462 - 467
12345