Spray dynamics and evaporation in a multihole GDI injector for pulsatile and split injection at elevated ambient pressure and temperature conditions

被引:11
作者
Muddapur, Anandteerth [1 ]
Jose, Jubin V. [1 ]
Sahu, Srikrishna [1 ]
Sundararajan, T. [1 ]
机构
[1] Indian Inst Technol Madras, Dept Mech Engn, Chennai 600036, Tamil Nadu, India
关键词
Split injection; Spray cone angle; Penetration length; Sauter mean diameter; Equivalence ratio; FLASH BOILING CONDITIONS; ATOMIZATION CHARACTERISTICS; STRATIFIED CHARGE; FUEL-INJECTION; COMBUSTION; ENGINE; PERFORMANCE; STRATEGY; BLENDS; SINGLE;
D O I
10.1016/j.fuel.2020.118057
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
The evolution of pulsatile and split injection spray from a multihole, Gasoline Direct Injection (GDI) atomizer at different ambient conditions is examined experimentally and computationally. The fuel is injected at 80 bar for a duration of 1.2 ms (for single injection) and also for different split proportions (ranging from 0.3 ms to 0.9 ms for the first injection and 0.9 ms to 0.3 ms for the second injection). The influence of different split proportions on the spray characteristics such as spray penetration length, cone angle and droplet size is studied in detail, and they are compared against those of single injection case to highlight the differences. Experiments were conducted in a constant volume chamber for elevated ambient pressures. The fuel spray was visualized using high-speed shadowgraph technique. Three-dimensional spray simulations were carried out using ANSYS FLUENT 16.1. The RANS-DPM coupled simulations were performed for higher ambient pressure and temperature conditions. Good agreement between the experiments and simulations is achieved with respect to spray penetration length and cone angles for both single and split injection strategies. For larger proportion of the first injection, the interaction of the second spray with the rear of the first spray was prominent at higher chamber pressure. The spray penetration length was found to reduce for split injection strategy for all ambient pressure conditions. The spatio-temporal evolution of vapour plumes in terms of equivalence ratio highlights the possibility of attaining near homogeneous, rich mixture or a stratified mixture depending on the split proportion and dwell time.
引用
收藏
页数:17
相关论文
共 44 条
[1]  
Anandteerth Srikrishna S, 2018, ICLASS 2018 P 14 TRI, P218
[2]  
[Anonymous], 1987, SAE TECHNICAL PAPER
[3]  
[Anonymous], 2014, SAE TECHNICAL PAPER
[4]   Analysis of PDA measurements on a double injection GDI spray [J].
Araneo, Lucio ;
Donde, Roberto ;
Postrioti, Lucio ;
Cavicchi, Andrea .
28TH CONFERENCE ON LIQUID ATOMIZATION AND SPRAY SYSTEMS, ILASS-EUROPE 2017, 2017, :538-545
[5]  
Beale JC, ATOM SPRAYS, V9
[6]  
Chryssakis C, 2003, 9 INT C LIQ AT SPRAY
[7]  
Chryssakis CA, 2003, SAE TECHNICAL PAPER
[8]   Effect of the fuel injection strategy on first-cycle firing and combustion characteristics during cold start in a TSDI gasoline engine [J].
Fan, Q. ;
Bian, J. ;
Lu, H. ;
Li, L. ;
Deng, J. .
INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY, 2012, 13 (04) :523-531
[9]   Experimental investigation on spray and atomization characteristics of diesel/gasoline/ethanol blends in high pressure common rail injection system [J].
Feng, Zehao ;
Zhan, Cheng ;
Tang, Chenglong ;
Yang, Ke ;
Huang, Zuohua .
ENERGY, 2016, 112 :549-561
[10]  
FLUENT, 2013, THEORY GUIDE