EXPERIMENTAL STUDY ON THE SURFACE QUALITY OF THE MEDICAL IMPLANTS OBTAINED BY SINGLE POINT INCREMENTAL FORMING

被引：37

作者：

Oleksik, V. ^{[1
]}

Pascu, A. ^{[2
]}

Deac, C. ^{[3
]}

Fleaca, R. ^{[4
]}

Bologa, O. ^{[1
]}

Racz, G. ^{[1
]}

机构：

[1] Lucian Blaga Univ Sibiu, Dept Machines & Equipment, Sibiu, Romania

[2] Lucian Blaga Univ Sibiu, Dept Machine Design Fundamentals, Sibiu, Romania

[3] Lucian Blaga Univ Sibiu, Dept Mat Sci & Technol, Sibiu, Romania

[4] Lucian Blaga Univ Sibiu, Fac Med, Sibiu, Romania

来源：

INTERNATIONAL JOURNAL OF MATERIAL FORMING | 2010年 / 3卷

关键词：

Single point incremental forming; surface quality; experimental research;

D O I：

10.1007/s12289-010-0922-x

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The paper presents a study based on the experimental research on the surface quality of the medical implants used for the partial resurfacing of the femoral condylar surface of the knee obtained by single point incremental forming process. The present paper discusses the measuring of the roughness of parts obtained through the previously mentioned process and highlights the factors that influence it. The initial roughness of the punch, the punch diameter, and the friction coefficient between the punch and the blank were considered. Also, the mathematical models that define different roughness parameters were determined.

引用

页码：935 / 938

页数：4

共 3 条

[1] Application of Incremental Forming process for high customised medical product manufacturing [J].

Ambrogio, G ;

De Napoli, L ;

Filice, L ;

Gagliardi, F ;

Muzzupappa, M .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2005, 162 :156-162

[2] Asymmetric two points incremental forming: Improving surface quality and geometric accuracy by tool path optimization [J].

Attanasio, A. ;

Ceretti, E. ;

Giardini, C. ;

Mazzoni, L. .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 197 (1-3) :59-67

[3] Tool and lubrication for negative incremental forming of a commercially pure titanium sheet [J].

Hussain, G. ;

Gao, L. ;

Hayat, N. ;

Cui, Z. ;

Pang, Y. C. ;

Dar, N. U. .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 203 (1-3) :193-201

← 1 →