Enhancement of mechanical properties of metamaterial absorber based on selective laser sintering and infiltration techniques

被引:20
作者
Wen, Youquan [1 ,2 ]
Xiong, Yijun [1 ,2 ]
Zhang, Fen [1 ,2 ]
Jiang, Chao [1 ,2 ]
Wang, Chunqi [1 ,2 ]
Du, Zuojuan [1 ,2 ]
Wang, Guanyuan [3 ]
Wang, Zeyu [3 ]
Huang, Xiaozhong [1 ,2 ]
机构
[1] Cent South Univ, Inst Aeronaut & Astronaut, Changsha 410012, Peoples R China
[2] Key Lab Adv Fibers & Composites Hunan Prov, Changsha 410012, Peoples R China
[3] Beijing Inst Spacecraft Syst Engineer, Beijing 100094, Peoples R China
关键词
Metamaterial absorber; Mechanical properties; Selective laser sintering; Infiltration; CARBON; COMPOSITES; SCAFFOLDS; POWDER;
D O I
10.1016/j.coco.2020.100373
中图分类号
TB33 [复合材料];
学科分类号
摘要
In this study, a 3D printing technology, selective laser sintering (SLS), and infiltration techniques were used to prepare a complex three-dimensional metamaterial absorber with high performance. The raw carbonyl iron (CI) powders were coated by polyamide12 (PA12), where the dissolution-precipitation method was used to improve their uniformity. The coated powders were then printed by SLS. The influence of laser power on the relative density of the composites was studied, where 18W was thought as the optimal laser power. And the SLS samples were infiltrated by thermosetting epoxy resin (EP, E-44) to increase their relative densities and strength. Me-chanical tests showed that the infiltrated composites have an ultimate tensile strength of 41.98 MPa, almost 15 times higher than those without infiltration. The final metamaterial absorber (MMA) exhibited the reflection loss below-10 dB in 2.7-18 GHz. The above results indicate that the fabricated processes proposed in this paper have great potential for the preparation of three-dimensional metamaterial absorbers.
引用
收藏
页数:8
相关论文
共 50 条
[41]   Effects of Chopped Carbon Fiber on the Forming, Structure, and Mechanical Properties of CCF/SiC Composites Fabricated by Selective Laser Sintering and Reactive Melt Infiltration [J].
Liu, Tianlong ;
Yang, Lixia ;
Chen, Zhaofeng ;
Wen, Guoqiang ;
Xiong, Lijun ;
Sun, Ce ;
Yang, Mengmeng ;
Wu, Qiong ;
Liu, Kai .
ADVANCED ENGINEERING MATERIALS, 2023, 25 (17)
[42]   Morphology and mechanical properties of PS/Al2O3 nanocomposites based on selective laser sintering [J].
Xu, ZF ;
Zhang, J ;
Zheng, HZ ;
Cai, CC ;
Huang, YH .
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2005, 21 (06) :866-870
[43]   Research on the Control of Mechanical Properties of Selective Laser Sintering PA12 Based on Heat Treatment(Invited) [J].
Han, Zhuang ;
Li, Meng ;
Zeng, Yong ;
Chen, Jimin ;
Liu, Xiubin .
ACTA PHOTONICA SINICA, 2024, 53 (10)
[44]   Properties of PLDLA/bioglass scaffolds produced by selective laser sintering [J].
Salmoria, Gean V. ;
Pereira, Rafaela V. ;
Fredel, Marcio C. ;
Casadei, Ana P. M. .
POLYMER BULLETIN, 2018, 75 (03) :1299-1309
[45]   Fabrication of SiC composites by selective laser sintering and reactive melt infiltration [J].
Wan, Changjie ;
Xia, Pengpeng ;
Hua, Jialiang ;
Chen, Xizhang ;
Lang, Wenchang ;
Xue, Wei ;
Geng, Yanfei ;
Fang, Tiehui .
CERAMICS INTERNATIONAL, 2025, 51 (11) :14842-14851
[46]   Fundamental investigation of part properties at accelerated beam speeds in the selective laser sintering process [J].
Lexow, Matthias Michael ;
Drexler, Maximilian ;
Drummer, Dietmar .
RAPID PROTOTYPING JOURNAL, 2017, 23 (06) :1099-1106
[47]   Mechanical properties of graded scaffolds developed by curve interference coupled with selective laser sintering [J].
Li, Junchao ;
Zhao, Ze ;
Yan, Ran ;
Yang, Yanan .
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 2020, 116
[48]   The Effect of Carbon Nanotubes on the Mechanical Properties of Wood Plastic Composites by Selective Laser Sintering [J].
Zhang, Yunhe ;
Fang, Jing ;
Li, Jian ;
Guo, Yanling ;
Wang, Qingwen .
POLYMERS, 2017, 9 (12)
[49]   Mechanical properties of PA6/PA12 blend specimens prepared by selective laser sintering [J].
Salmoria, G. V. ;
Leite, J. L. ;
Vieira, L. F. ;
Pires, A. T. N. ;
Roesler, C. R. M. .
POLYMER TESTING, 2012, 31 (03) :411-416
[50]   Evaluation of the mechanical properties of polyamide 12 regarding different percentages of reused material in the selective laser sintering process [J].
da Silva, Rafael Couto ;
Dicati, Gabriela Wessling Oening ;
Gubaua, Jose Eduardo ;
Radovanovic, Eduardo ;
Favaro, Silvia Luciana .
RAPID PROTOTYPING JOURNAL, 2023, 29 (10) :2134-2148