Preparation of yttria-stabilized zirconia fibers from a zirconia sol and their properties

被引：1

作者：

Shida, Kenji ^{[1
]}

Ohara, Yusuke ^{[1
]}

Matsuda, Motohide ^{[2
]}

Suyama, Yoko ^{[1
]}

机构：

[1] Shimane Univ, Interdisciplinary Grad Sch Sci & Engn, Matsue, Shimane 6908504, Japan

[2] Kumamoto Univ, Grad Sch Sci & Technol, Kumamoto 8608555, Japan

来源：

JOURNAL OF THE CERAMIC SOCIETY OF JAPAN | 2012年 / 120卷 / 1407期

关键词：

Zirconia fiber; Yttria stabilized zirconia; Self assembly; Nano particle; Oxygen ion conductivity; IONIC-CONDUCTIVITY; PRECURSOR; SUSPENSION;

D O I：

10.2109/jcersj2.120.478

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Yttria-stabilized zirconia (YSZ) fibers various widths ranging from 36 to 66 mu m of width were prepared by a drying process at 363 K from a zirconia sol containing 4 mol % yttria with 40 nm of primary particle size. The effects of preparation method on the crystal phase, microstructure and electrical properties of the obtained YSZ fibers were investigated. The obtained fibers were heat-treated at 1473 K for 1 h. The grain size and relative density of the fiber were 126 nm and 97%, respectively. The oxygen ion conductivity of the fiber showed heat-treated at 1473 K is 0.18 S/cm at 1273 K, which is the same as 8 YSZ bulk ceramics. (C) 2012 The Ceramic Society of Japan. All rights reserved.

引用

页码：478 / 482

页数：5

共 50 条

[41] Preparation and Characterization of Highly Permeable Porous Yttria-Stabilized Zirconia Hollow Fiber Membrane
Zhang Xiaozhen
Zhou Jainer
Wang Yongqing
Jiang Yuhua
Meng Guangyao
Liu Xingqin
RARE METAL MATERIALS AND ENGINEERING, 2011, 40 : 11 - 14
[42] Simple Preparation of Yttria-Stabilized Zirconia Powders by Plasma Discharge Electrolysis in Nitrate Solution
Li, Jingyu
Xie, Jianyu
Li, Chengfang
Li, Song
Liu, Yubao
Shi, Zhongning
ADVANCED ENGINEERING MATERIALS, 2024, 26 (14)
[43] Isothermal catalytic oxidation of diesel soot on Yttria-stabilized Zirconia
Obeid, E.
Tsampas, M. N.
Jonet, S.
Boreave, A.
Burel, L.
Steil, M. C.
Blanchard, G.
Pajot, K.
Vernoux, P.
SOLID STATE IONICS, 2014, 262 : 253 - 256
[44] Wettability analysis of metallic nickel particles on yttria-stabilized zirconia
Matsui, Toshiaki
Tsujimoto, Hiroaki
Muroyama, Hiroki
Eguchi, Koichi
JOURNAL OF POWER SOURCES, 2024, 618
[45] Dispersion of concentrated aqueous yttria-stabilized zirconia with ammonium polyacrylate
Suarez, Gustavo
Albano, Maria P.
Garrido, Liliana B.
Aglietti, Esteban F.
CERAMICS INTERNATIONAL, 2007, 33 (06) : 925 - 929
[46] Flash sintering of yttria-stabilized zirconia: Fundamental understanding and applications
Ren, Ke
Liu, Jinling
Wang, Yiguang
SCRIPTA MATERIALIA, 2020, 187 : 371 - 378
[47] Influence of compatibility between sol and intermediate layer on the performance of yttria-stabilized zirconia nanofiltration membrane
Da, Xiaowei
Zou, Dong
Chen, Xianfu
Qiu, Minghui
Ke, Wei
Fan, Yiqun
CERAMICS INTERNATIONAL, 2021, 47 (16) : 22801 - 22809
[48] Dissolution and diffusion kinetics of yttria-stabilized zirconia into molten silicates
Holgate, Collin S.
Seward, Gareth G. E.
Ericks, Andrew R.
Poerschke, David L.
Levi, Carlos G.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2021, 41 (03) : 1984 - 1994
[49] Electrospray and pressurized spray deposition of yttria-stabilized zirconia films
Wilhelm, O
Pratsinis, SE
Perednis, D
Gauckler, LJ
THIN SOLID FILMS, 2005, 479 (1-2) : 121 - 129
[50] Yttria-stabilized zirconia films deposited by plasma spraying and sputtering
Fedtke, P
Wienecke, M
Bunescu, MC
Barfels, T
Deistung, K
Pietrzak, M
JOURNAL OF SOLID STATE ELECTROCHEMISTRY, 2004, 8 (09) : 626 - 632

← 1 2 3 4 5 →