Strength of adhesively-bonded butt joints of tubes subjected to combined high-rate loads

被引：31

作者：

Sato, C ^{[1
]}

Ikegami, K ^{[1
]}

机构：

[1] Tokyo Inst Technol, Precis & Intelligence Lab, Midori Ku, Yokohama, Kanagawa 226, Japan

来源：

JOURNAL OF ADHESION | 1999年 / 70卷 / 1-2期

关键词：

adhesion; dynamic strength; high rate loading; combined stress; fracture; Hopkinson bar;

D O I：

10.1080/00218469908010487

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

The dynamic strength of adhesively-bonded joints was investigated experimentally. The strength of the bonded joints under combined high rate loading was measured using the clamped Hopkinson bar method. Tubular butt joints bonded by epoxy resin were used For the experiment. Combined stress waves of tension and torsion were applied to the specimens. The strength of the adhesively-bonded joint was determined by measuring the stress waves propagated in the load output tube of the specimen. It was found that the dynamic strength of the adhesive joints was greater than the static strength under tensile and shear load.

引用

页码：57 / 73

页数：17

共 50 条

[1] Strength of cylindrical butt joints bonded with epoxy adhesives under combined static or high-rate loading
Murakami, S.
Sekiguchi, Y.
Sato, C.
Yokoi, E.
Furusawa, T.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2016, 67 : 86 - 93
[2] The Effects of Width on the Strength of Adhesively Bonded Z Joints Subjected to Tensile Loads
Adin, Hamit
Turgut, Aydin
JOURNAL OF ADHESION, 2013, 89 (01): : 1 - 18
[3] Utilization of Fractal analysis in strength prediction of adhesively-bonded joints
Kniewald, Dusan
Guzanova, Anna
Brezinova, Janette
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2008, 22 (01) : 1 - 13
[4] Strength and failure of bulky adhesive joints with adhesively-bonded columns
Liu, J. (liujiem@online.ln.cn), 1613, VSP BV (18):
[5] Strength and failure of bulky adhesive joints with adhesively-bonded columns
Liu, JM
Liu, JT
Sawa, T
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2004, 18 (14) : 1613 - 1623
[6] The effect of defects on the strength of adhesively-bonded joints and its significance for NDT
Adams, R. D.
Karachalios, E. F.
EMERGING TECHNOLOGIES IN NON-DESTRUCTIVE TESTING, 2008, : 327 - 329
[7] Influence of the Cohesive Law Parameters on the Strength Prediction of Adhesively-Bonded Joints
Campilho, R. D. S. G.
Chaves, F. J. P.
Pinto, A. M. G.
Banea, M. D.
da Silva, L. F. M.
ADVANCED MATERIALS FORUM VI, PTS 1 AND 2, 2013, 730-732 : 1000 - +
[8] Validation of advanced numerical techniques for the strength prediction of adhesively-bonded joints
Rocha, R. J. B.
Campilho, R. D. S. G.
Silva, F. J. G.
MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE 2017 (MESIC 2017), 2017, 13 : 43 - 50
[9] Experimental and numerical analysis of adhesively-bonded T joints under peel loads
Carneiro, M. A. S.
Campilho, R. D. S. G.
Silva, F. J. G.
MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE 2017 (MESIC 2017), 2017, 13 : 51 - 58
[10] Strength and failure mode of adhesively-bonded joints at different loading rates
Wang, J
Kelly, D
JOURNAL OF ADHESION, 1998, 68 (1-2): : 1 - 19

← 1 2 3 4 5 →