Bearing strength of pinned joints in woven fabric composites with small weaving angles

被引：21

作者：

Atas, Cesim ^{[1
]}

机构：

[1] Dokuz Eylul Univ, Dept Mech Engn, TR-35100 Izmir, Turkey

来源：

COMPOSITE STRUCTURES | 2009年 / 88卷 / 01期

关键词：

Small weaving angle; Glass/epoxy composite; Pinned joint; Failure modes; MECHANICALLY FASTENED JOINTS; BOLT-HOLE CLEARANCE; FAILURE ANALYSIS; STACKING-SEQUENCE; CLAMPING LOADS; STRESS; PREDICTION;

D O I：

10.1016/j.compstruct.2008.04.002

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

Bearing strength of pinned joints in woven fabric composites with small weaving angles is examined experimentally in this study. Such woven fabrics, i.e. non-orthogonal fabrics, are not commercially available. Therefore, a step-by-step procedure for transforming an orthogonal fabric into a non-orthogonal fabric with small weaving angles is presented. Four different stacking sequences are chosen for comparison, considering ratios w/d = 3, 4 and e/d = 1, 2, 3. It is concluded that using layers with identical orientations may result in undesirable severe damage modes and small load carrying capacities in mechanically fastened joints of woven fabric composites with small weaving angles. A few recommendations regarding how to avoid premature failure, obtain bearing as the primary mode of failure and increase load carrying capacity can be found in the text and Section 5. (C) 2008 Elsevier Ltd. All rights reserved.

引用

页码：40 / 45

页数：6

共 21 条

[1] Failure of unidirectional-woven composite laminated pin-loaded joints [J].

Ahn, HS ;

Kweon, JH ;

Choi, JH .

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2005, 24 (07) :735-752

[2] The effect of stacking sequence of carbon epoxy composite laminates on pinned-joint strength [J].

Aktas, A ;

Dirikolu, MH .

COMPOSITE STRUCTURES, 2003, 62 (01) :107-111

[3] Impact response of woven composites with small weaving angles [J].

Atas, Cesim ;

Liu, Dahsin .

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2008, 35 (02) :80-97

[4] Stress analysis and strength prediction of mechanically fastened joints in FRP: A review [J].

Camanho, PP ;

Matthews, FL .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 1997, 28 (06) :529-547

[5] Failure load prediction of mechanically fastened composite joints [J].

Choi, JH ;

Chun, YJ .

JOURNAL OF COMPOSITE MATERIALS, 2003, 37 (24) :2163-2177

[6] Stress and failure analysis of mechanically fastened joints in composite laminates [J].

Dano, ML ;

Gendron, G ;

Picard, A .

COMPOSITE STRUCTURES, 2000, 50 (03) :287-296

[7] Bearing behavior of mechanically fastened joints in composite laminates - Part I: Strength and local strains [J].

Girard, C ;

Dano, ML ;

Picard, A ;

Gendron, G .

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 2003, 10 (01) :1-21

[8] Failure analysis of woven kevlar fiber reinforced epoxy composites pinned joints [J].

Içten, BM ;

Karakuzu, R ;

Toygar, ME .

COMPOSITE STRUCTURES, 2006, 73 (04) :443-450

[9] Failure strength of woven glass fiber-epoxy composites pinned joints [J].

Içten, BM ;

Okutan, B ;

Karakuzu, R .

JOURNAL OF COMPOSITE MATERIALS, 2003, 37 (15) :1337-1350

[10] Bearing strength of carbon fibre/epoxy laminates:: effects of bolt-hole clearance [J].

Kelly, G ;

Hallström, S .

COMPOSITES PART B-ENGINEERING, 2004, 35 (04) :331-343

← 1 2 3 →