Optimization of lactoferrin and bovine serum albumin separation using ion-exchange membrane chromatography

Lactoferrin (LF), which is a high value minor whey protein, has recently received extensive attention from research scientists and industry due to its multifunction and potential therapeutic applications. In this study, the separation of two similar-sized proteins: bovine serum albumin (BSA) and LF was investigated using strong cation and anion exchange membrane chromatography (MC). Single protein and BSA-LF mixture adsorption were performed on Sartobind Q75 and S75 at pH between the LF and BSA isoelectric points. Identical breakthrough curves were obtained for both single protein and binary protein mixture, which suggests that there is no protein adsorption competition at the binding sites. The process optimization was further studied to yield optimum buffer and operating conditions. The highest BSA flux per membrane area (728.00 gm(-2) h(-1)) was obtained using 100 mM phosphate buffer solution at pH 6.0 on the cation exchange membrane, whereas LF was bound to the membrane with the dynamic binding capacity at 10% breakthrough (DBC10%) of about 60 mg. On the anion exchange membrane, LF was collected in the effluent at the flux of 287.46 gm(-2) h(-1) using 5 mM phosphate buffer at pH 6.0, while BSA was retained on the membrane with DBC10% equal to 60.96 mg. The combination effect between pH change and hydrophobic interaction improved the eluted protein mass for both anion and cation exchangers. Furthermore, the completed separation cycle was operated with the Sartobind 575 device with a short process time of 34.19 min and optimal LF productivity over 2628.84 mg mL(-1) h-1. This study confirms the advantage of MC for the separation of biomolecules with similar molecular weight and different isoelectric points, such as BSA-LF mixture separation. This fast and effective protein separation method could be applied at an industry scale. (C) 2015 Elsevier B.V. All rights reserved.