Effect of precipitation strengthening in low alloyed Mn-Ni cast steels

被引：11

作者：

Glownia, J. ^{[1
]}

Kalandyk, B. ^{[1
]}

机构：

[1] AGH Univ Sci & Technol, Fac Foundry Engn, Dept Steel Foundry Engn, Krakow, Poland

来源：

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2008年 / 207卷 / 1-3期

关键词：

microalloyed cast steels; high strength; vanadium microaddition; carbonitride precipitation;

D O I：

10.1016/j.jmatprotec.2007.12.097

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The influence of modification and heat treatment on the properties of low alloyed C-Mn 1.4-V cast steels has been investigated. A new type of cast steel with a yield strength above 850 MPa and elongation higher than 8% obtained in stepped samples with 20-75 mm wall thickness by microalloying, optimal tempering and control of ferrite volume in the matrix has been developed. Yield strength and toughness were controlled by the precipitation of carbonitrides; in substantially ferritic microstructure. The morphology of these precipitates was controlled by the cooling rate during crystallization of the alloy (C) 2007 Elsevier B.V. All rights reserved.

引用

页码：147 / 153

页数：7

共 13 条

[1]

GAJDA L, 2004, HUTNIK WIADOMOSCI HU, P214

[2] Precipitation hardening in metals [J].

Gladman, T .

MATERIALS SCIENCE AND TECHNOLOGY, 1999, 15 (01) :30-36

[3]

Gladman T., 1997, PHYS METALLURGY MICR, V1st

[4]

Jana BD, 2003, MATER SCI TECH-LOND, V19, P80, DOI [10.1179/026708303225008554, 10.1179/026708303225008644]

[5]

Kalandyk B, 2004, REV ADV MATER SCI, V8, P44

[6] MICROSTRUCTURE CONTROL OF FERRITE-PEARLITE HIGH-STRENGTH LOW-ALLOY STEELS UTILIZING MICROALLOYING ADDITIONS [J].

KUZIAK, R ;

BOLD, T ;

CHENG, YW .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1995, 53 (1-2) :255-262

[7] Precipitation in high strength low alloy (HSLA) steel: a TEM study [J].

Mishra, SK ;

Das, S ;

Ranganathan, S .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2002, 323 (1-2) :285-292

[8]

OESTERLE W, 1994, STEEL RES, V68, P338

[9] The effect of silicon, vanadium and nitrogen on the microstructure and hardness of air cooled medium carbon low alloy steels [J].

Ollilainen, V ;

Kasprzak, W ;

Holappa, L .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 134 (03) :405-412

[10] Microalloyed V-Nb-Ti and V steels - Part 2 - Precipitation behaviour during processing of structural beams [J].

Shanmugam, S ;

Tanniru, M ;

Misra, RDK ;

Panda, D ;

Jansto, S .

MATERIALS SCIENCE AND TECHNOLOGY, 2005, 21 (02) :165-177

← 1 2 →