Experimental Study on Combustion Characteristics of Grease Attached on Oxygen Cylinder in High-pressure Oxygen

被引:0
|
作者
Zeng Guohui [1 ]
Zhang Lijing [1 ]
Tao Gang [1 ]
Zhang Liang [2 ]
机构
[1] Nanjing Univ Technol, Coll Urban Construct & Safety Engn, Nanjing, Jiangsu, Peoples R China
[2] Minist Housing & Urban, Technol & Ind Dev Ctr, Beijing, Peoples R China
来源
2013 INTERNATIONAL CONFERENCE ON PROCESS EQUIPMENT, MECHATRONICS ENGINEERING AND MATERIAL SCIENCE | 2013年 / 331卷
关键词
oxygenation process; lubricating oil; oxidation; ignition point; burning rate; Pressurized Thermogravimetry (PTG);
D O I
10.4028/www.scientific.net/AMM.331.591
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
The possible reasons of an explosion during the process of filling oxygen cylinder were analyzed in this article. And finding the grease in the cylinder may be the main cause of this incident. Using three kinds of lubricating oil as the experimental grease were experimented in combustion reaction under different pressure of oxygen by PTG. The relationship between the increment of lubricating oils' mass, ignition point, combustion rate and the pressure of oxygen were derived from the TG and DTG curve (TG-DTG curve). Experimental results show that the oil oxidation increment increase and the ignition point decrease with the pressure of oxygen escalating, and the higher pressure of oxygen, the lower combustion rate. In addition, the fact was confirmed that the lubricants additives have an effect on combustion characteristics of lubricating oil in high-pressure oxygen.
引用
收藏
页码:591 / +
页数:2
相关论文
共 50 条