New results in 3D meso-mechanical analysis of concrete specimens using interface elements

被引:0
|
作者
Caballero, A. [1 ]
Carol, I. [1 ]
López, C. M. [1 ]
机构
[1] UPC, ETSECCPB, Barcelona, Spain
来源
Computational Modelling of Concrete Structures | 2006年
关键词
D O I
暂无
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
A meso-mechanical model for the numerical analysis of concrete specimens in 3D has been recently proposed. In this approach, concrete is represented as a composite material with the larger aggregates embedded in a mortar-plus-aggregates matrix. Both continuum-type components are considered linear elastic, while the possibilities of failure are provided with the systematic use of zero-thickness interface elements equipped with a cohesive fracture constitutive law. These elements are inserted along all potential crack planes in the mesh "a priori" of the analysis. In this paper, the basic features of the model are summarized, and then results of calculations are presented, which include uniaxial tension and compression loading of 64 and 137-aggregate cubical specimens. The results confirm the consistency of the approach with physical phenomena and well-known features of concrete behavior, and show low scatter between specimens of different size and number of aggregates but similar volume ratio.
引用
收藏
页码:43 / 52
页数:10
相关论文
共 50 条
  • [41] Construction of a 3D meso-structure and analysis of mechanical properties for deposit body medium
    石崇
    陈凯华
    徐卫亚
    张海龙
    王海礼
    王盛年
    Journal of Central South University, 2015, 22 (01) : 270 - 279
  • [42] Construction of a 3D meso-structure and analysis of mechanical properties for deposit body medium
    Shi Chong
    Chen Kai-hua
    Xu Wei-ya
    Zhang Hai-long
    Wang Hai-li
    Wang Sheng-nian
    JOURNAL OF CENTRAL SOUTH UNIVERSITY, 2015, 22 (01) : 270 - 279
  • [43] Construction of a 3D meso-structure and analysis of mechanical properties for deposit body medium
    Chong Shi
    Kai-hua Chen
    Wei-ya Xu
    Hai-long Zhang
    Hai-li Wang
    Sheng-nian Wang
    Journal of Central South University, 2015, 22 : 270 - 279
  • [44] Optimisation of 3D printed concrete for artificial reefs: Biofouling and mechanical analysis
    Ly, Oceane
    Yoris-Nobile, Adrian, I
    Sebaibi, Nassim
    Blanco-Fernandez, Elena
    Boutouil, Mohamed
    Castro-Fresno, Daniel
    Hall, Alice E.
    Herbert, Roger J. H.
    Deboucha, Walid
    Reis, Bianca
    Franco, Joao N.
    Borges, Maria Teresa
    Sousa-Pinto, Isabel
    van der Linden, Pieter
    Stafford, Rick
    CONSTRUCTION AND BUILDING MATERIALS, 2021, 272
  • [45] Analysis of anisotropic behavior in 3D concrete printing for mechanical property evaluation
    Aminpour, Nima
    Memari, Ali
    JOURNAL OF BUILDING ENGINEERING, 2025, 99
  • [46] Analysis of unsteady heat conduction in concrete specimens using 3-D FEM
    Nakazono, T
    Kunitake, M
    Kondo, F
    Inagaki, H
    Nakazawa, T
    Kikumura, T
    Saito, M
    Kakuda, I
    PROCEEDINGS OF THE SIXTH (1996) INTERNATIONAL OFFSHORE AND POLAR ENGINEERING CONFERENCE, VOL III, 1996, 1996, : 566 - 571
  • [47] Method of meshing ITZ structure in 3D meso-level finite element analysis for concrete
    Li, Shuguang
    Li, Qingbin
    FINITE ELEMENTS IN ANALYSIS AND DESIGN, 2015, 93 : 96 - 106
  • [48] Buildability and Mechanical Properties of 3D Printed Concrete
    Joh, Changbin
    Lee, Jungwoo
    Bui, The Quang
    Park, Jihun
    Yang, In-Hwan
    MATERIALS, 2020, 13 (21) : 1 - 24
  • [49] Mechanical behavior of steel fiber reinforced concrete at cryogenic temperatures: Characterization with 3D meso-scale modelling
    Jin, Liu
    Jia, Likun
    Zhang, Renbo
    Yu, Wenxuan
    Du, Xiuli
    COLD REGIONS SCIENCE AND TECHNOLOGY, 2024, 219
  • [50] 3D meso-scale modelling of concrete material in spall tests
    Gang Chen
    Yifei Hao
    Hong Hao
    Materials and Structures, 2015, 48 : 1887 - 1899