Effect of Ca and Y on the Microstructure, Mechanical Properties and Corrosion Properties of Mg-6Zn-1Al Alloy

被引：0

作者：

Wang Rong ^{[1
,2
]}

Le Qichi ^{[1
]}

Wang Engang ^{[1
]}

Cui Jianzhong ^{[1
]}

Ren Zheng ^{[2
]}

Cheng Xiangyu ^{[2
]}

Zhu Xiurong ^{[2
]}

机构：

[1] Northeastern Univ, Minist Educ, Key Lab Electromagnet Proc Mat, Shenyang 110819, Peoples R China

[2] China North Mat Sci & Engn Technol Grp, Ningbo 315103, Peoples R China

来源：

RARE METAL MATERIALS AND ENGINEERING | 2020年 / 49卷 / 07期

关键词：

Mg-Zn-Al alloy; microalloying; extrusion deformation; dynamic precipitation; HIGH-STRENGTH; TEXTURE EVOLUTION; MAGNESIUM ALLOYS; ZN ALLOY; EXTRUSION; DUCTILITY; SYSTEM;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The effect of trace addition of Ca and Y on the microstructure, mechanical properties and corrosion properties of Mg-6Zn-1Al alloy were investigated. The results show that the second phase in the as-cast ZAM610 alloy consists of alpha-Mg, Mg51Zn20 and a small amount of Al8Mn5 phases. The Mg51Zn20 phase in the as-cast alloy is substituted by Mg-32(Al, Zn)(49) with Ca addition. alpha-Mg, Mg51Zn20, Al2Y and a small amount of Al10Mn2Y phases are found in the Y-containing alloys. Y or/and Ca addition refines markedly the recrystallized grains of the tested magnesium alloys, and the alloy of Y+Ca addition has the minimum grain sizes. In the Ca-containing alloy, MgZn2 phase is dynamically precipitated during extrusion, which has strong effect of Zener retardation, and forms a double-mode microstructure composed of fine recrystallized grain and coarse deformation zone. ZAMX6100 alloy has the highest tensile strength, yield strength and elongation, which are 354 MPa, 313 MPa and 17.3%, respectively. In addition, Al2Y phase in Y-containing alloy promotes recrystallization nucleation during deformation, resulting in a reduction of deformation bands. The improvement of mechanical properties of tested alloys after microalloying can be attributed to the refinement of dynamic recrystallization grains, the formation of Al2Y phase particles and the dynamic precipitation of MgZn 2 phase. For corrosion resistance of the Ca-containing alloy, the raising reason is that a large amount of dynamically precipitated MgZn2 phase prevents the continuous corrosion, while Y element improves the corrosion resistance of the alloy matrix.

引用

页码：2451 / 2461

页数：11

共 40 条

[1] Heat resistance of Mg-Zn-Al-Ca alloy castings [J].

Anyanwu, IA ;

Kamado, S ;

Honda, T ;

Kojima, Y ;

Takeda, S ;

Ishida, T .

MAGNESIUM ALLOYS 2000, 2000, 350-3 :73-78

[2] Effect of microalloyed Zr on the extruded microstructure of Mg-6.2Zn-based alloys [J].

Bhattacharjee, T. ;

Nakata, T. ;

Sasaki, T. T. ;

Kamado, S. ;

Hono, K. .

SCRIPTA MATERIALIA, 2014, 90-91 :37-40

[3] The texture and anisotropy of magnesium-zinc-rare earth alloy sheets [J].

Bohlen, Jan ;

Nuernberg, Marcus R. ;

Senn, Jeremy W. ;

Letzig, Dietmar ;

Agnew, Sean R. .

ACTA MATERIALIA, 2007, 55 (06) :2101-2112

[4]

Chen JJ, 2015, IEEE INT CONF COMM, P1, DOI [10.1109/ChinaSIP.2015.7230350, 10.1109/ICCW.2015.7247066]

[5]

Chen Z. H., 2005, WROUGHT MAGNESIUM

[6]

Cheng SL, 2006, RARE METAL MAT ENG, V35, P1400

[7] Texture and stretch formability of a rolled Mg-Zn alloy containing dilute content of Y [J].

Chino, Yasumasa ;

Sassa, Kensuke ;

Mabuchi, Mamoru .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 513-14 :394-400

[8]

Chu F Q, 2010, J INT STOMATOLOGY, V37, P189

[9] Susceptibility of rare-earth-magnesium alloys to micro-galvanic corrosion [J].

Coy, A. E. ;

Viejo, F. ;

Skeldon, P. ;

Thompson, G. E. .

CORROSION SCIENCE, 2010, 52 (12) :3896-3906

[10] Effect of microalloying with Ca on the microstructure and mechanical properties of Mg-6 mass%Zn alloys [J].

Du, Y. Z. ;

Qiao, X. G. ;

Zheng, M. Y. ;

Wang, D. B. ;

Wu, K. ;

Golovin, I. S. .

MATERIALS & DESIGN, 2016, 98 :285-293

← 1 2 3 4 →