Experimental study of the influence of perforated circular-ring on pressure loss and heat transfer enhancement using sensitivity analysis

被引:23
作者
Sheikholeslami, M. [1 ]
Gorji-Bandpy, M. [1 ]
Ganji, D. D. [1 ]
机构
[1] Babol Univ Technol, Dept Mech Engn, Babol Sar, Iran
关键词
Perforated circular-ring; Air to water heat exchanger; Turbulator; Heat transfer; Friction; CORRUGATED TUBES; FLOW; DROP; EXCHANGER;
D O I
10.1016/j.applthermaleng.2015.08.068
中图分类号
O414.1 [热力学];
学科分类号
摘要
Experimental analysis on pressure loss and heat transfer improvement in an air to water double pipe heat exchanger is presented. Typical circular-ring (TCR) and perforated circular-ring (PCR) turbulators, assumed as turbulators. Water and air move through inner and outer pipes, respectively. Experimental analysis is conducted for various values of open area ratio (0, 0.0208, 0.0416 and 0.0833), Reynolds number (6000, 8000, 10,000 and 12,000) and pitch ratio (1.83, 2.92 and 5.83). According to experimental data, correlations for Nusselt number, friction factor and thermal performance are presented as functions of Reynolds number, pitch ratio and open area ratio. Sensitivity analysis is used to find the effect of each active parameter. Results indicated that using PCRs leads to obtain lower heat transfer enhancement than the CRs. Thermal performance increases with increase of open area ratio but it reduces with rise of pitch ratio and Reynolds number. The most effective parameter for thermal performance is open area ratio. (C) 2015 Elsevier Ltd. All rights reserved.
引用
收藏
页码:739 / 748
页数:10
相关论文
共 22 条
[1]   Thermal performance of tubular heat exchanger with multiple twisted-tape inserts [J].
Chokphoemphun, Suriya ;
Pimsarn, Monsak ;
Thianpong, Chinaruk ;
Promvonge, Pongjet .
CHINESE JOURNAL OF CHEMICAL ENGINEERING, 2015, 23 (05) :755-762
[2]   Investigation of heat transfer and pressure drop in a concentric heat exchanger with snail entrance [J].
Durmus, A ;
Durmus, A ;
Esen, M .
APPLIED THERMAL ENGINEERING, 2002, 22 (03) :321-332
[3]  
Farlow S.J., 1984, SELF ORG METHOD MODE, DOI DOI 10.1097/SS.0b013e3182499910
[4]   The influence of artificial roughness shape on heat transfer enhancement: Corrugated tubes, dimpled tubes and wire coils [J].
Garcia, A. ;
Solano, J. P. ;
Vicente, P. G. ;
Viedma, A. .
APPLIED THERMAL ENGINEERING, 2012, 35 :196-201
[5]   Multi-objective optimization of outward convex corrugated tubes using response surface methodology [J].
Han, Huaizhi ;
Li, Bingxi ;
Shao, Wei .
APPLIED THERMAL ENGINEERING, 2014, 70 (01) :250-262
[6]   A review of different heat exchangers designs for increasing the diesel exhaust waste heat recovery [J].
Hatami, M. ;
Ganji, D. D. ;
Gorji-Bandpy, M. .
RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 2014, 37 :168-181
[7]  
Incropera F.P., 2006, INTRO HEAT TRANSFER
[8]   Enhanced forced-convection from ribbed or machine-roughened inner surfaces within triangular ducts [J].
Leung, CW ;
Wong, TT ;
Probert, SD .
APPLIED ENERGY, 2001, 69 (02) :87-99
[9]   River stage forecasting in Bangladesh: Neural network approach [J].
Liong, SY ;
Lim, WH ;
Paudyal, GN .
JOURNAL OF COMPUTING IN CIVIL ENGINEERING, 2000, 14 (01) :1-8
[10]   Study on heat transfer and pressure drop performances of ribbed channel in the high temperature heat exchanger [J].
Ma, Ting ;
Wang, Qiu-wang ;
Zeng, Min ;
Chen, Yi-tung ;
Liu, Yang ;
Nagarajan, Vijaisri .
APPLIED ENERGY, 2012, 99 :393-401