Typical Dynamic Models of the Cyclic Mechanism on the Software SimulationX

One of the main tasks in the development of the machinery is to increase the speed of machine, and consequently, their productivity. With increasing of the machine speed, the dynamic loads on their separate mechanisms and the moving joints are increased. Under these circumstances, the identification of the weakest points and elements of the machine is a priority for the dynamic calculation. The machine consists of a large number of the structurally different mechanisms. These are cams, levers, gears, frictions and the combined cyclic mechanisms. The paper is shown that the typical dynamic model of cyclic mechanisms may be well calculated on the software SimulationX with the instant graphical representation and the analysis of the results and the automatic analysis of the natural frequencies and the mode shapes. Here it is assumed; jointly use the analytical methods of research of the dynamics of cyclic mechanisms and the dynamic models on the software SimulationX.