Investigation of nanostructure formation mechanism and magnetic properties in Fe45Co45Ni10 system synthesized by mechanical alloying

被引：47

作者：

Baghbaderani, H. Ahmadian ^{[1
,2
]}

Sharafi, S. ^{[1
,2
]}

Chermahini, M. Delshad ^{[3
]}

机构：

[1] Shahid Bahonar Univ Kerman, Dept Mat Sci & Engn, Kerman, Iran

[2] Shahid Bahonar Univ Kerman, Mineral Ind Res Ctr, Kerman, Iran

[3] Mat & Energy Res Ctr, Dept Ceram, Karaj, Iran

来源：

POWDER TECHNOLOGY | 2012年 / 230卷

关键词：

Nanostructured materials; Mechanical alloying; Magnetic measurement; GRAIN-SIZE; FE; POWDERS; MODEL;

D O I：

10.1016/j.powtec.2012.07.039

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

Mechanism of nanostructure formation and magnetic properties in Fe45Co45Ni10 alloy synthesized by high energy milling has been explored in this study. Our results suggested a simultaneous increase in the dislocation density and formation of low-angle grain boundaries when one of the cold welding or fracturing process was predominant (up to 2 h of milling). This was followed by a steady state between cold welding and fracturing (2 to 35 h), which coincided with high angle grain boundaries formation. After milling for 10 h, dissolution of Co and Ni in Fe. correspondingly, resulted in a bcc solid solution. The powders exhibited a minimum grain size of similar to 10 nm and lattice parameter of similar to 0.28512 nm after 35 and 20 h, respectively. Alloy formation enhanced magnetization saturation to about 186 emu/g and grain size refinement decreased coercivity to approximately 32 Oe. (C) 2012 Elsevier B.V. All rights reserved.

引用

页码：241 / 246

页数：6

共 35 条

[21]

Porter DA., 1992, Phase Transformations in Metals and Alloys, DOI 10.1007/978-1-4899-3051-4

[22]

Reed-Hill RE., 1992, Physical metallurgy principles, V3rd

[23] Soft magnetic composite materials (SMCs) [J].

Shokrollahi, H. ;

Janghorban, K. .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 189 (1-3) :1-12

[24] A coherent polycrystal model for the inverse Hall-Petch relation in nanocrystalline materials [J].

Song, HW ;

Guo, SR ;

Hu, ZQ .

NANOSTRUCTURED MATERIALS, 1999, 11 (02) :203-210

[25] Near equiatomic FeCo alloys: Constitution, mechanical and magnetic properties [J].

Sourmail, T .

PROGRESS IN MATERIALS SCIENCE, 2005, 50 (07) :816-880

[26] Mechanical alloying and milling [J].

Suryanarayana, C .

PROGRESS IN MATERIALS SCIENCE, 2001, 46 (1-2) :1-184

[27]

Suryanarayana C., 2004, MECH ALLOYING MILLIN

[28]

SURYANARAYANA C, 1998, XRAY DIFFRACTION PRA, P153, DOI DOI 10.1007/978-1-4899-0148-4_6

[29] Random magnetocrystalline anisotropy in two-phase nanocrystalline systems [J].

Suzuki, K ;

Cadogan, JM .

PHYSICAL REVIEW B, 1998, 58 (05) :2730-2739

[30] Calculations of mixing enthalpy and mismatch entropy for ternary amorphous alloys [J].

Takeuchi, A ;

Inoue, A .

MATERIALS TRANSACTIONS JIM, 2000, 41 (11) :1372-1378

← 1 2 3 4 →