Process parameters in the manufacture of ceramic ZnO nanofibers made by electrospinning

被引：5
|
作者：
Nonato, Renato C. [1 ]
Morales, Ana R. [1 ]
Rocha, Mateus C. [1 ]
Nista, Silvia V. G. [1 ]
Mei, Lucia H. I. [1 ]
Bonse, Baltus C. [2 ]
机构：
[1] Univ Campinas Unicamp, DEMBIO, Campinas, SP, Brazil
[2] Ctr Univ FEI, Sao Bernardo Do Campo, SP, Brazil
来源：
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING | 2017年 / 123卷 / 01期
关键词：
POLYETHYLENE FIBERS; ACID-SOLUTION; THIN-FILMS; MATS; NANOCOMPOSITES; MORPHOLOGY;
D O I：
10.1007/s00339-016-0717-0
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Zinc oxide (ZnO) nanofibers were prepared by electrospinning under different conditions using a solution of poly(vinyl alcohol) and zinc acetate as precursor. A 2(3) factorial design was made to study the influence of the process parameters in the electrospinning (collector distance, flow rate and voltage), and a 2(2) factorial design was made to study the influence of the calcination process (time and temperature). SEM images were made to analyze the fiber morphology before and after calcination process, and the images were made to measure the nanofiber diameter. X-ray diffraction was made to analyze the total precursor conversion to ZnO and the elimination of the polymeric carrier.
引用
收藏
页数：8
相关论文
共 50 条
  • [1] Process parameters in the manufacture of ceramic ZnO nanofibers made by electrospinning
    Renato C. Nonato
    Ana R. Morales
    Mateus C. Rocha
    Silvia V. G. Nista
    Lucia H. I. Mei
    Baltus C. Bonse
    Applied Physics A, 2017, 123
  • [2] Solution parameters in the manufacture of ceramic ZnO nanofibers made by electrospinning
    Renato C. Nonato
    Ana R. Morales
    Amanda F. M. Vieira
    Silvia V. G. Nista
    Lucia H. I. Mei
    Baltus C. Bonse
    Applied Physics A, 2016, 122
  • [3] Solution parameters in the manufacture of ceramic ZnO nanofibers made by electrospinning
    Nonato, Renato C.
    Morales, Ana R.
    Vieira, Amanda F. M.
    Nista, Silvia V. G.
    Mei, Lucia H. I.
    Bonse, Baltus C.
    APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2016, 122 (03):
  • [4] Synthesis of ZnO nanofibers by the electrospinning process
    Di Mauro, Alessandro
    Zimbone, Massimo
    Fragala, Maria Elena
    Impellizzeri, Giuliana
    MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING, 2016, 42 : 98 - 101
  • [5] ZnO Micro and Nanofibers made by electrospinning: Fabrication and Characterization
    Nonato, Renato C.
    Morales, Ana R.
    Vieira, Amanda F. M.
    Nista, Silvia V. G.
    Mei, Lucia H. I.
    Bonse, Baltus C.
    2014 IEEE 14TH INTERNATIONAL CONFERENCE ON NANOTECHNOLOGY (IEEE-NANO), 2014, : 820 - 824
  • [6] Electrospinning of Cyclodextrin Nanofibers: The Effect of Process Parameters
    Topuz, Fuat
    Uyar, Tamer
    JOURNAL OF NANOMATERIALS, 2020, 2020
  • [7] Influence of Solution Properties and Process Parameters on the Formation and Morphology of YSZ and NiO Ceramic Nanofibers by Electrospinning
    Gazquez, Gerard Cadafalch
    Smulders, Vera
    Veldhuis, Sjoerd A.
    Wieringa, Paul
    Moroni, Lorenzo
    Boukamp, Bernard A.
    ten Elshof, Johan E.
    NANOMATERIALS, 2017, 7 (01)
  • [8] Electrospinning of Biomedical Nanofibers/Nanomembranes: Effects of Process Parameters
    Chinnappan, Balaji Ayyanar
    Krishnaswamy, Marimuthu
    Xu, Huaizhong
    Hoque, Md Enamul
    POLYMERS, 2022, 14 (18)
  • [9] Electrospinning of functional ceramic nanofibers
    Sahoo, B.
    Panda, P. K.
    Ramakrishna, S.
    OPEN CERAMICS, 2022, 11
  • [10] Electrospinning of nickel oxide nanofibers: Process parameters and morphology control
    Khalil, Abdullah
    Hashaikeh, Raed
    MATERIALS CHARACTERIZATION, 2014, 95 : 65 - 71
12345